Krauss Maffei 130 ton Polyester Injection Molder

Model: KM 130 -750CX
- Only used for samples

(For images, please see next pages)


For more details on Krauss Maffei 130 ton Polyester Injection Molder click here

300 Ton Injection Moulding Machine

Model: Oima 3300.300
- Approx screw size: 75 / 80 mm
- Distance between tie bars:630 mm x 630 mm
- Approx shot weight:1000g-1400g depending on material
- This has an ECO 3000 control module an

For more details on 300 Ton Injection Moulding Machine click here

225 Ton Husky Injection Moulding Machine

Model: Husky SX 225RS
- Platen size: 35.70" x 35.70"
- Dist between tie bars: 24.40" x 24.40"
- Maximum daylight: 40.40"
- Ejector stroke: 5.9"
- Shot height (Min/Max): 7.9"/21.7"
- Clamp Strokee:18.

For more details on 225 Ton Husky Injection Moulding Machine click here

220 Ton Krauss Maffei Injection Moulding Machine

Model No: KM 200-900-B2
- Platen size: 27.55" x 32.67"
- Dist. between tie bars: 22.00" x 19.68"
- Mold thickness: 11.10"
- Machine dimensions: 24'L x 5'5"W x 6'5"H

Equipped With:
- Digitall Control
- 16 Oz.

For more details on 220 Ton Krauss Maffei Injection Moulding Machine click here

JSW 150 ton Injection Moulder

Model: J150SBS
- Screw diameter: 46 mm
- Swept volume: 300 cm3
- Shot weight (PS): 273 gms
- Injection rate: 184 cm3/sec.
- Injection pressure: 1,720 kgf/cm3
- Plasticizing rate: 129 kg/hr.
- SScrew: 233 rpm

Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 400 mm
- Min.

For more details on JSW 150 ton Injection Moulder click here

300 Ton Netstal Injection Moulding Machine

Model: S3000-900
- Distance between tie bars: 28.35" x 28.35"
- Opening stroke: 0 - 27.56"
- Min - max mold height: 23.62"- 37.40"
- Screw stroke: 7.87"

Equipped with:
- 16.08 Oz. Injectioon unit (L/D: 22.

For more details on 300 Ton Netstal Injection Moulding Machine click here

230 Ton Van Dorn Injection Moulding Machine

Model: 230HT / Max
- Shot size: 20 ounce
- Tie bar spacing: 22"x22"
- Platen size: 32"x32"
- Daylight: 42"- 7" ( Min/ Max)
- Clamp stroke: 20" Adjustable
- Mold thickness: 22" / 7" ( Min/M

For more details on 230 Ton Van Dorn Injection Moulding Machine click here

220 Ton Goldstar (LG) Injection Molder

Model: 220 H
- Shot size:19.2 oz
- Tie bar spacing: 21.3" x 21.3"
- Platen size: 31.5" x 31.5"
- Daylight: 31.5"
- Core pull: Yes

Features:
- Hydraulic Knockouts
- HICOM 300 Controls


For more details on 220 Ton Goldstar (LG) Injection Molder click here

220 Ton LG Injection Moulding Machine

Model: IDE220EN
- Shot size: 19.2 Oz.
- Tie bar spacing: 21.26 X 21.26
- Platen size: 31.1 X 31.1
- Clamp stroke: 22 in
- Core Pull: Yes
- Voltage: 480 Volt

Features:
- Hicom 300
- Screw diameter: 1.

For more details on 220 Ton LG Injection Moulding Machine click here

800 Ton Krauss Maffei Injection Moulding Machine

Model: KM 800
- 8100 injection unit
- MX MC5 control
- Plasticizing diameter: 105 mm
- Shot weight:4137
- Distance tie bar:1120 x 1000
- It is brand new and uses two moulds at once.

For more details on 800 Ton Krauss Maffei Injection Moulding Machine click here

380 Ton Krauss Maffei Injection Moulding Machine

Model: KM 380-1400-1400
- Injection unit: 1400 mm
- CZ WEN MC 4 control
- Screw diameter: 60/60 mm
- Screw speed: 260/260
- Mould clamping force: 3800 KN
- Mould opening distance max.: 1020 mmm
- Mould installation height: Min.

For more details on 380 Ton Krauss Maffei Injection Moulding Machine click here

230 Ton Van Dorn Injection Moulding Machine

Model: 230HT / Max
- Shot size: 20 ounce
- Tie bar spacing: 22"x22"
- Platen size: 32"x32"
- Daylight: 42"- 7" ( Min/ Max)
- Clamp stroke: 20" Adjustable
- Mold thickness: 22" / 7" ( Min/M

For more details on 230 Ton Van Dorn Injection Moulding Machine click here

220 Ton Goldstar (LG) Injection Molder

Model: 220 H
- Shot size:19.2 oz
- Tie bar spacing: 21.3" x 21.3"
- Platen size: 31.5" x 31.5"
- Daylight: 31.5"
- Core pull: Yes

Features:
- Hydraulic Knockouts
- HICOM 300 Controls


For more details on 220 Ton Goldstar (LG) Injection Molder click here

220 Ton LG Injection Moulding Machine

Model: IDE220EN
- Shot size: 19.2 Oz.
- Tie bar spacing: 21.26 X 21.26
- Platen size: 31.1 X 31.1
- Clamp stroke: 22 in
- Core Pull: Yes
- Voltage: 480 Volt

Features:
- Hicom 300
- Screw diameter: 1.

For more details on 220 Ton LG Injection Moulding Machine click here

800 Ton Krauss Maffei Injection Moulding Machine

Model: KM 800
- 8100 injection unit
- MX MC5 control
- Plasticizing diameter: 105 mm
- Shot weight:4137
- Distance tie bar:1120 x 1000
- It is brand new and uses two moulds at once.

For more details on 800 Ton Krauss Maffei Injection Moulding Machine click here