Model: KM 130 -750CX
- Only used for samples
(For images, please see next pages)
For more details on Krauss Maffei 130 ton Polyester Injection Molder click here
Tuesday, December 27, 2011
Tuesday, December 20, 2011
300 Ton Injection Moulding Machine
Model: Oima 3300.300
- Approx screw size: 75 / 80 mm
- Distance between tie bars:630 mm x 630 mm
- Approx shot weight:1000g-1400g depending on material
- This has an ECO 3000 control module an
For more details on 300 Ton Injection Moulding Machine click here
- Approx screw size: 75 / 80 mm
- Distance between tie bars:630 mm x 630 mm
- Approx shot weight:1000g-1400g depending on material
- This has an ECO 3000 control module an
For more details on 300 Ton Injection Moulding Machine click here
225 Ton Husky Injection Moulding Machine
Model: Husky SX 225RS
- Platen size: 35.70" x 35.70"
- Dist between tie bars: 24.40" x 24.40"
- Maximum daylight: 40.40"
- Ejector stroke: 5.9"
- Shot height (Min/Max): 7.9"/21.7"
- Clamp Strokee:18.
For more details on 225 Ton Husky Injection Moulding Machine click here
- Platen size: 35.70" x 35.70"
- Dist between tie bars: 24.40" x 24.40"
- Maximum daylight: 40.40"
- Ejector stroke: 5.9"
- Shot height (Min/Max): 7.9"/21.7"
- Clamp Strokee:18.
For more details on 225 Ton Husky Injection Moulding Machine click here
220 Ton Krauss Maffei Injection Moulding Machine
Model No: KM 200-900-B2
- Platen size: 27.55" x 32.67"
- Dist. between tie bars: 22.00" x 19.68"
- Mold thickness: 11.10"
- Machine dimensions: 24'L x 5'5"W x 6'5"H
Equipped With:
- Digitall Control
- 16 Oz.
For more details on 220 Ton Krauss Maffei Injection Moulding Machine click here
- Platen size: 27.55" x 32.67"
- Dist. between tie bars: 22.00" x 19.68"
- Mold thickness: 11.10"
- Machine dimensions: 24'L x 5'5"W x 6'5"H
Equipped With:
- Digitall Control
- 16 Oz.
For more details on 220 Ton Krauss Maffei Injection Moulding Machine click here
JSW 150 ton Injection Moulder
Model: J150SBS
- Screw diameter: 46 mm
- Swept volume: 300 cm3
- Shot weight (PS): 273 gms
- Injection rate: 184 cm3/sec.
- Injection pressure: 1,720 kgf/cm3
- Plasticizing rate: 129 kg/hr.
- SScrew: 233 rpm
Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 400 mm
- Min.
For more details on JSW 150 ton Injection Moulder click here
- Screw diameter: 46 mm
- Swept volume: 300 cm3
- Shot weight (PS): 273 gms
- Injection rate: 184 cm3/sec.
- Injection pressure: 1,720 kgf/cm3
- Plasticizing rate: 129 kg/hr.
- SScrew: 233 rpm
Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 400 mm
- Min.
For more details on JSW 150 ton Injection Moulder click here
300 Ton Netstal Injection Moulding Machine
Model: S3000-900
- Distance between tie bars: 28.35" x 28.35"
- Opening stroke: 0 - 27.56"
- Min - max mold height: 23.62"- 37.40"
- Screw stroke: 7.87"
Equipped with:
- 16.08 Oz. Injectioon unit (L/D: 22.
For more details on 300 Ton Netstal Injection Moulding Machine click here
- Distance between tie bars: 28.35" x 28.35"
- Opening stroke: 0 - 27.56"
- Min - max mold height: 23.62"- 37.40"
- Screw stroke: 7.87"
Equipped with:
- 16.08 Oz. Injectioon unit (L/D: 22.
For more details on 300 Ton Netstal Injection Moulding Machine click here
230 Ton Van Dorn Injection Moulding Machine
Model: 230HT / Max
- Shot size: 20 ounce
- Tie bar spacing: 22"x22"
- Platen size: 32"x32"
- Daylight: 42"- 7" ( Min/ Max)
- Clamp stroke: 20" Adjustable
- Mold thickness: 22" / 7" ( Min/M
For more details on 230 Ton Van Dorn Injection Moulding Machine click here
- Shot size: 20 ounce
- Tie bar spacing: 22"x22"
- Platen size: 32"x32"
- Daylight: 42"- 7" ( Min/ Max)
- Clamp stroke: 20" Adjustable
- Mold thickness: 22" / 7" ( Min/M
For more details on 230 Ton Van Dorn Injection Moulding Machine click here
220 Ton Goldstar (LG) Injection Molder
Model: 220 H
- Shot size:19.2 oz
- Tie bar spacing: 21.3" x 21.3"
- Platen size: 31.5" x 31.5"
- Daylight: 31.5"
- Core pull: Yes
Features:
- Hydraulic Knockouts
- HICOM 300 Controls
For more details on 220 Ton Goldstar (LG) Injection Molder click here
- Shot size:19.2 oz
- Tie bar spacing: 21.3" x 21.3"
- Platen size: 31.5" x 31.5"
- Daylight: 31.5"
- Core pull: Yes
Features:
- Hydraulic Knockouts
- HICOM 300 Controls
For more details on 220 Ton Goldstar (LG) Injection Molder click here
220 Ton LG Injection Moulding Machine
Model: IDE220EN
- Shot size: 19.2 Oz.
- Tie bar spacing: 21.26 X 21.26
- Platen size: 31.1 X 31.1
- Clamp stroke: 22 in
- Core Pull: Yes
- Voltage: 480 Volt
Features:
- Hicom 300
- Screw diameter: 1.
For more details on 220 Ton LG Injection Moulding Machine click here
- Shot size: 19.2 Oz.
- Tie bar spacing: 21.26 X 21.26
- Platen size: 31.1 X 31.1
- Clamp stroke: 22 in
- Core Pull: Yes
- Voltage: 480 Volt
Features:
- Hicom 300
- Screw diameter: 1.
For more details on 220 Ton LG Injection Moulding Machine click here
800 Ton Krauss Maffei Injection Moulding Machine
Model: KM 800
- 8100 injection unit
- MX MC5 control
- Plasticizing diameter: 105 mm
- Shot weight:4137
- Distance tie bar:1120 x 1000
- It is brand new and uses two moulds at once.
For more details on 800 Ton Krauss Maffei Injection Moulding Machine click here
- 8100 injection unit
- MX MC5 control
- Plasticizing diameter: 105 mm
- Shot weight:4137
- Distance tie bar:1120 x 1000
- It is brand new and uses two moulds at once.
For more details on 800 Ton Krauss Maffei Injection Moulding Machine click here
380 Ton Krauss Maffei Injection Moulding Machine
Model: KM 380-1400-1400
- Injection unit: 1400 mm
- CZ WEN MC 4 control
- Screw diameter: 60/60 mm
- Screw speed: 260/260
- Mould clamping force: 3800 KN
- Mould opening distance max.: 1020 mmm
- Mould installation height: Min.
For more details on 380 Ton Krauss Maffei Injection Moulding Machine click here
- Injection unit: 1400 mm
- CZ WEN MC 4 control
- Screw diameter: 60/60 mm
- Screw speed: 260/260
- Mould clamping force: 3800 KN
- Mould opening distance max.: 1020 mmm
- Mould installation height: Min.
For more details on 380 Ton Krauss Maffei Injection Moulding Machine click here
Saturday, December 17, 2011
230 Ton Van Dorn Injection Moulding Machine
Model: 230HT / Max
- Shot size: 20 ounce
- Tie bar spacing: 22"x22"
- Platen size: 32"x32"
- Daylight: 42"- 7" ( Min/ Max)
- Clamp stroke: 20" Adjustable
- Mold thickness: 22" / 7" ( Min/M
For more details on 230 Ton Van Dorn Injection Moulding Machine click here
- Shot size: 20 ounce
- Tie bar spacing: 22"x22"
- Platen size: 32"x32"
- Daylight: 42"- 7" ( Min/ Max)
- Clamp stroke: 20" Adjustable
- Mold thickness: 22" / 7" ( Min/M
For more details on 230 Ton Van Dorn Injection Moulding Machine click here
220 Ton Goldstar (LG) Injection Molder
Model: 220 H
- Shot size:19.2 oz
- Tie bar spacing: 21.3" x 21.3"
- Platen size: 31.5" x 31.5"
- Daylight: 31.5"
- Core pull: Yes
Features:
- Hydraulic Knockouts
- HICOM 300 Controls
For more details on 220 Ton Goldstar (LG) Injection Molder click here
- Shot size:19.2 oz
- Tie bar spacing: 21.3" x 21.3"
- Platen size: 31.5" x 31.5"
- Daylight: 31.5"
- Core pull: Yes
Features:
- Hydraulic Knockouts
- HICOM 300 Controls
For more details on 220 Ton Goldstar (LG) Injection Molder click here
220 Ton LG Injection Moulding Machine
Model: IDE220EN
- Shot size: 19.2 Oz.
- Tie bar spacing: 21.26 X 21.26
- Platen size: 31.1 X 31.1
- Clamp stroke: 22 in
- Core Pull: Yes
- Voltage: 480 Volt
Features:
- Hicom 300
- Screw diameter: 1.
For more details on 220 Ton LG Injection Moulding Machine click here
- Shot size: 19.2 Oz.
- Tie bar spacing: 21.26 X 21.26
- Platen size: 31.1 X 31.1
- Clamp stroke: 22 in
- Core Pull: Yes
- Voltage: 480 Volt
Features:
- Hicom 300
- Screw diameter: 1.
For more details on 220 Ton LG Injection Moulding Machine click here
800 Ton Krauss Maffei Injection Moulding Machine
Model: KM 800
- 8100 injection unit
- MX MC5 control
- Plasticizing diameter: 105 mm
- Shot weight:4137
- Distance tie bar:1120 x 1000
- It is brand new and uses two moulds at once.
For more details on 800 Ton Krauss Maffei Injection Moulding Machine click here
- 8100 injection unit
- MX MC5 control
- Plasticizing diameter: 105 mm
- Shot weight:4137
- Distance tie bar:1120 x 1000
- It is brand new and uses two moulds at once.
For more details on 800 Ton Krauss Maffei Injection Moulding Machine click here
Wednesday, November 16, 2011
380 Ton Krauss Maffei Injection Moulding Machine
Model: KM 380-1400-1400
- Injection unit: 1400 mm
- CZ WEN MC 4 control
- Screw diameter: 60/60 mm
- Screw speed: 260/260
- Mould clamping force: 3800 KN
- Mould opening distance max.: 1020 mmm
- Mould installation height: Min.
For more details on 380 Ton Krauss Maffei Injection Moulding Machine click here
- Injection unit: 1400 mm
- CZ WEN MC 4 control
- Screw diameter: 60/60 mm
- Screw speed: 260/260
- Mould clamping force: 3800 KN
- Mould opening distance max.: 1020 mmm
- Mould installation height: Min.
For more details on 380 Ton Krauss Maffei Injection Moulding Machine click here
265 Ton Kawaguchi Injection Moulding Machine
- Model: K265B
- Diameter: 60 mm
- Tie bar: 610 x 610
- Shot weight: 600 grams
- Delivery status: Ready stock
(For picture, please see next page)
For more details on 265 Ton Kawaguchi Injection Moulding Machine click here
- Diameter: 60 mm
- Tie bar: 610 x 610
- Shot weight: 600 grams
- Delivery status: Ready stock
(For picture, please see next page)
For more details on 265 Ton Kawaguchi Injection Moulding Machine click here
50 Ton Meiki Injection Moulding Machine
Model: 50T (1998)
- Diameter: 28 mm
- Tie bar: 310 x 310
- Shot weight: 70 grams
- Delivery status: Ready stock
(For picture, please see next pages)
For more details on 50 Ton Meiki Injection Moulding Machine click here
- Diameter: 28 mm
- Tie bar: 310 x 310
- Shot weight: 70 grams
- Delivery status: Ready stock
(For picture, please see next pages)
For more details on 50 Ton Meiki Injection Moulding Machine click here
55 Ton Toshiba Injection Moulding Machine
Model: IS55EPN
- Screw diameter:28 mm
- Tie bar: 310 x 310
- Shot weight: 68 grams
- Delivery status: In stock
(For picture, please see next page)
For more details on 55 Ton Toshiba Injection Moulding Machine click here
- Screw diameter:28 mm
- Tie bar: 310 x 310
- Shot weight: 68 grams
- Delivery status: In stock
(For picture, please see next page)
For more details on 55 Ton Toshiba Injection Moulding Machine click here
25 Ton - 120 Ton Injection Moulding Machine
- Brand: Toshiba 100
- Model: IS100
- Diameter:36 mm
- Tie bar:410 x 410
- Clamp:100 Ton
- Shot weight:170 grams
- Delivery status: Ready stock
- Brand: Arburg
- Model: 850-D
- Year: 19
For more details on 25 Ton - 120 Ton Injection Moulding Machine click here
- Model: IS100
- Diameter:36 mm
- Tie bar:410 x 410
- Clamp:100 Ton
- Shot weight:170 grams
- Delivery status: Ready stock
- Brand: Arburg
- Model: 850-D
- Year: 19
For more details on 25 Ton - 120 Ton Injection Moulding Machine click here
260 - 360 Ton Injection Moulding Machine
Brand Negri Bossi
- Model: 1993
- Diameter:70 mm
- Tie bar: 550 x 550
- Clamp: 260 Ton
- Shot weight: 700 grams
- Delivery Status: Ready Stock
- Brand: Nissei
- Model: FE360S100
- Dia
For more details on 260 - 360 Ton Injection Moulding Machine click here
- Model: 1993
- Diameter:70 mm
- Tie bar: 550 x 550
- Clamp: 260 Ton
- Shot weight: 700 grams
- Delivery Status: Ready Stock
- Brand: Nissei
- Model: FE360S100
- Dia
For more details on 260 - 360 Ton Injection Moulding Machine click here
Wednesday, October 19, 2011
60 Ton Engel Injection Molder
Model: ES-200 / 60
- Platen size: 25.59" x 16.93"
- Opening stroke: 13.00"
- Min. mold height: 7.48"
- Max. daylight: 27.16"
- Machine dim's: 18.5"L x 6.5"W x 7'H
- Weight: 9,500 Lbs.
Eqquipped With:
- Tie-bar less
- CC-90 control
- 3.
For more details on 60 Ton Engel Injection Molder click here
- Platen size: 25.59" x 16.93"
- Opening stroke: 13.00"
- Min. mold height: 7.48"
- Max. daylight: 27.16"
- Machine dim's: 18.5"L x 6.5"W x 7'H
- Weight: 9,500 Lbs.
Eqquipped With:
- Tie-bar less
- CC-90 control
- 3.
For more details on 60 Ton Engel Injection Molder click here
Monday, October 10, 2011
Toshiba 850 ton Injection Moulding Machine
Model: Toshiba IS850E
- Screw diameter: 100 mm
- Injection volume-calculated: 4310 cm3
- Injection capacity - PS: 3970 g
- Injection capacity - PE: 3140 g
- Injection pressure: 1840 lg/cm2
- Injection rate (standard): 890 cm3/sec
- Plasticizing Capacity (PS): 480 kg / hr
- Screw rotation speed: 127/127 rpm
- Mold opening force: 65.
For more details on Toshiba 850 ton Injection Moulding Machine click here
- Screw diameter: 100 mm
- Injection volume-calculated: 4310 cm3
- Injection capacity - PS: 3970 g
- Injection capacity - PE: 3140 g
- Injection pressure: 1840 lg/cm2
- Injection rate (standard): 890 cm3/sec
- Plasticizing Capacity (PS): 480 kg / hr
- Screw rotation speed: 127/127 rpm
- Mold opening force: 65.
For more details on Toshiba 850 ton Injection Moulding Machine click here
30 Ton Engel Injection Molder
Model: ES-80/30
- Platen size: 14.96" x 14.96"
- Distance between tie bars: 10.23" X 10.23"
- Min. Daylight: 7.08"
- Max. Daylight: 20.07"
- Screw: 98"
Equipped With:
- EC-88-A02 Controllerr
- 1.
For more details on 30 Ton Engel Injection Molder click here
- Platen size: 14.96" x 14.96"
- Distance between tie bars: 10.23" X 10.23"
- Min. Daylight: 7.08"
- Max. Daylight: 20.07"
- Screw: 98"
Equipped With:
- EC-88-A02 Controllerr
- 1.
For more details on 30 Ton Engel Injection Molder click here
Sandretto 1000 Ton Injection Moulding Machine
Model: Mega
- Distance between tie bar: 1230 mm x 1230 mm
- Shot volume: 3490 cm3
- Screw diameter: 90 mm
- Min / max mould thickness: 450/1350 mm
For more details on Sandretto 1000 Ton Injection Moulding Machine click here
- Distance between tie bar: 1230 mm x 1230 mm
- Shot volume: 3490 cm3
- Screw diameter: 90 mm
- Min / max mould thickness: 450/1350 mm
For more details on Sandretto 1000 Ton Injection Moulding Machine click here
Netstal 350 Ton Injection Moulder
Model: HP 3500 - 11650 Graphtrack
- Screw diameter: 62 mm
- Shot weight (P/S): 688 grams
- Calculated injection: 748 cm3
- Injection pressure: 2204 bar
- Platen sizes: 1000 x 1000 mm
- Distance
For more details on Netstal 350 Ton Injection Moulder click here
- Screw diameter: 62 mm
- Shot weight (P/S): 688 grams
- Calculated injection: 748 cm3
- Injection pressure: 2204 bar
- Platen sizes: 1000 x 1000 mm
- Distance
For more details on Netstal 350 Ton Injection Moulder click here
Netstal 240 Ton Injection Moulder
Model: HP 2400 H - 870 Sycap Graphtrack
- Screw diameter: 50 mm
- Shot weight (P/S): 377 gr
- Calculated injection: 393 cm 3
- Injection pressure: 2209 bar
- Platen sizes: 970 x 840 mm
- Distancce between tie bars: 560 x 560 mm
- Min.
For more details on Netstal 240 Ton Injection Moulder click here
- Screw diameter: 50 mm
- Shot weight (P/S): 377 gr
- Calculated injection: 393 cm 3
- Injection pressure: 2209 bar
- Platen sizes: 970 x 840 mm
- Distancce between tie bars: 560 x 560 mm
- Min.
For more details on Netstal 240 Ton Injection Moulder click here
Van Dorn 880 Ton Injection Molding Machine
Model: 880 HP/165F
- Shot size: 165 oz
- Screw diameter: 115 mm
- Tie bar distance: 46.3" x 39.4"
- Platens: 66" x 59"
- Ejector stroke: 7.9"
- Min mold height: 23.6"
- Injection strokee: 18.
For more details on Van Dorn 880 Ton Injection Molding Machine click here
- Shot size: 165 oz
- Screw diameter: 115 mm
- Tie bar distance: 46.3" x 39.4"
- Platens: 66" x 59"
- Ejector stroke: 7.9"
- Min mold height: 23.6"
- Injection strokee: 18.
For more details on Van Dorn 880 Ton Injection Molding Machine click here
Battenfeld 300 Ton Injection Moulding Machine
Model:TM2700/1330
- Shot size: 30 oz
- Platen size: 37.01" x 37.01"
- Max open daylight: 49.21"
- Distance between tiebars: 24.8" x 24.8"
- Min / max mold thickness: 9.84"/25.59"
- Volta
For more details on Battenfeld 300 Ton Injection Moulding Machine click here
- Shot size: 30 oz
- Platen size: 37.01" x 37.01"
- Max open daylight: 49.21"
- Distance between tiebars: 24.8" x 24.8"
- Min / max mold thickness: 9.84"/25.59"
- Volta
For more details on Battenfeld 300 Ton Injection Moulding Machine click here
Demag 300 Ton Injection Moulding Machine
Model: 300HT/635-1220
- Shot Size: 25.4 oz.
- Screw diameter: 60 mm
- Injection stroke: 10.6"
- Clamp stroke: 24"
- Tie bar distance: 25" x 25"
- Platen size: 37" x 37"
- Max dayligh
For more details on Demag 300 Ton Injection Moulding Machine click here
- Shot Size: 25.4 oz.
- Screw diameter: 60 mm
- Injection stroke: 10.6"
- Clamp stroke: 24"
- Tie bar distance: 25" x 25"
- Platen size: 37" x 37"
- Max dayligh
For more details on Demag 300 Ton Injection Moulding Machine click here
Husky 1000 ton Injection Moulding Machine
Model: EW 900RS 140-130
- Shot size (oz.): 260
- Daylight: 97"
- Platen size: 69" x 54"
- Tie bar spacing: 61" x 46"
- Screw diameter: 135 mm
- (4) core pulls
- (2) air valves
For more details on Husky 1000 ton Injection Moulding Machine click here
- Shot size (oz.): 260
- Daylight: 97"
- Platen size: 69" x 54"
- Tie bar spacing: 61" x 46"
- Screw diameter: 135 mm
- (4) core pulls
- (2) air valves
For more details on Husky 1000 ton Injection Moulding Machine click here
Wednesday, August 31, 2011
1000 ton Cincinnati Injection Moulder
Cincinnati Milacron 1000 ton 288 oz. injection molding machine.
- This machine is in very good condition and has 50,000 + hours.
For more details on 1000 ton Cincinnati Injection Moulder click here
- This machine is in very good condition and has 50,000 + hours.
For more details on 1000 ton Cincinnati Injection Moulder click here
Monday, August 22, 2011
650 to 750 tons Injection Moulding Machine
We are looking for 650 to 750 tons injection moulding machine as follows:
- Acceptable age: 1995 and later models
- Preferred Brands: Toshiba, Nissei, Engel, Vandorn, Arburg
- Platen size: 53.5" xx 53.
For more details on 650 to 750 tons Injection Moulding Machine click here
- Acceptable age: 1995 and later models
- Preferred Brands: Toshiba, Nissei, Engel, Vandorn, Arburg
- Platen size: 53.5" xx 53.
For more details on 650 to 750 tons Injection Moulding Machine click here
100 To 120 Ton Injection Moulding Machine
We are looking for 100 -120 ton injection moulding machine as follows.
- Manufacture: PET preform 28 mm cap
- Year: 2000
- Budget: INR 8,00,000 to INR 11,00,000
For more details on 100 To 120 Ton Injection Moulding Machine click here
- Manufacture: PET preform 28 mm cap
- Year: 2000
- Budget: INR 8,00,000 to INR 11,00,000
For more details on 100 To 120 Ton Injection Moulding Machine click here
330 Ton To 500 Ton Injection Moulding Machine
We are looking for an Injection Molding Press that is used 2000 or newer between 330 Ton to 500 Ton
For more details on 330 Ton To 500 Ton Injection Moulding Machine click here
For more details on 330 Ton To 500 Ton Injection Moulding Machine click here
328 Ton Chen Hsong Injection Moulding Machine
- Make: Chen Hsong Machinery Co Ltd
- Machine Series: Jetmaster
- Model: JM 328 C
- Shot weight: 1038 g
- Shot volume: 1128 cu.Cm.
- Screw diameter: 67 mm
- Injection pressure: 1,785 kgf // sq.
For more details on 328 Ton Chen Hsong Injection Moulding Machine click here
- Machine Series: Jetmaster
- Model: JM 328 C
- Shot weight: 1038 g
- Shot volume: 1128 cu.Cm.
- Screw diameter: 67 mm
- Injection pressure: 1,785 kgf // sq.
For more details on 328 Ton Chen Hsong Injection Moulding Machine click here
Battenfeld BA 850 Ton Injection Moulding Machine
Model: Battenfeld BA 8500/6300
- Shot weight PS appr: 3,050 gram
- Screw diameter: 110 mm
- Tie bar Distance: 900 x 900 mm
- Daylight: 1700 mm
- Hydraulic Ejector
- 2 cores
- Unilog 4000
- Acc
For more details on Battenfeld BA 850 Ton Injection Moulding Machine click here
- Shot weight PS appr: 3,050 gram
- Screw diameter: 110 mm
- Tie bar Distance: 900 x 900 mm
- Daylight: 1700 mm
- Hydraulic Ejector
- 2 cores
- Unilog 4000
- Acc
For more details on Battenfeld BA 850 Ton Injection Moulding Machine click here
320 Ton Krauss Maffei Injection Moulding Machine
Model: 320/2700 C 3
- Column Break: 710x710 mm
- Plate Dimension: 106 x1095 mm
- Opening Stroke: 920 mm
- Mould Dimensions: 380 mm
- Screw Diameter: 70 Qmm
- Injection Volume: 1047 cm ³
- Injecction Weight: 953 g-ps
- Injection Pressure: 1778 bar
- Engine power: 130 kw
- Heating power: 42 kw
- Machine Weight: 16,300 kg
- Machine width: 2430 mm
- Machine Length: 6780 mm
- Machine Height: 2090 mm
- Control Unit: MC3
- Core System has 2 pieces.
For more details on 320 Ton Krauss Maffei Injection Moulding Machine click here
- Column Break: 710x710 mm
- Plate Dimension: 106 x1095 mm
- Opening Stroke: 920 mm
- Mould Dimensions: 380 mm
- Screw Diameter: 70 Qmm
- Injection Volume: 1047 cm ³
- Injecction Weight: 953 g-ps
- Injection Pressure: 1778 bar
- Engine power: 130 kw
- Heating power: 42 kw
- Machine Weight: 16,300 kg
- Machine width: 2430 mm
- Machine Length: 6780 mm
- Machine Height: 2090 mm
- Control Unit: MC3
- Core System has 2 pieces.
For more details on 320 Ton Krauss Maffei Injection Moulding Machine click here
Husky 300 Ton Injection Moulding Machine
We are looking for 300 ton injection moulding machine as follows:
- 24 cavity
- 25 to 30 gm
- 28 mm pco
For more details on Husky 300 Ton Injection Moulding Machine click here
- 24 cavity
- 25 to 30 gm
- 28 mm pco
For more details on Husky 300 Ton Injection Moulding Machine click here
300 to 400 Ton Injection Moulding Machine
We are looking for 300 to 400 ton injection moulding machine as follows:
- Brand: L&T, Demag, Windsor, Toshiba
- Acceptable age: 8 years old
- Machine must be in running condition
For more details on 300 to 400 Ton Injection Moulding Machine click here
- Brand: L&T, Demag, Windsor, Toshiba
- Acceptable age: 8 years old
- Machine must be in running condition
For more details on 300 to 400 Ton Injection Moulding Machine click here
80-120 Ton Injection Moulding Machine
We are looking for a used Plastic injection moulding machine as follows:
- 80-120 Ton
- Tie bar distance above 400 mm
- Budget: INR 2,00,000 to 2,50,000
For more details on 80-120 Ton Injection Moulding Machine click here
- 80-120 Ton
- Tie bar distance above 400 mm
- Budget: INR 2,00,000 to 2,50,000
For more details on 80-120 Ton Injection Moulding Machine click here
Tuesday, July 26, 2011
Engel 500 Ton Injection Moulding Machine
Model: ES7050/500K
- Shot Size: 193 oz. (PET)/176 oz. (PS)/138 oz. (HDPE)
- Clamp Opening Force: 60 Tons |
- Clamp Stroke: 27.56"
- Min / Max Mold Height: 11.81"/33.94"
- Distance between Tiie bars: 34.
For more details on Engel 500 Ton Injection Moulding Machine click here
- Shot Size: 193 oz. (PET)/176 oz. (PS)/138 oz. (HDPE)
- Clamp Opening Force: 60 Tons |
- Clamp Stroke: 27.56"
- Min / Max Mold Height: 11.81"/33.94"
- Distance between Tiie bars: 34.
For more details on Engel 500 Ton Injection Moulding Machine click here
Friday, July 08, 2011
40 ton Injection Moulding Machine
We are looking for 40 ton injection moulding machine as follows:
- Make:Engel / Arburg/ Demag
- Acceptable age: 10 years old
- Budget: INR 5,00,000
For more details on 40 ton Injection Moulding Machine click here
- Make:Engel / Arburg/ Demag
- Acceptable age: 10 years old
- Budget: INR 5,00,000
For more details on 40 ton Injection Moulding Machine click here
Wednesday, June 29, 2011
Upto 150 Injection Moulding Machine
We are looking for 60 to 150 tons injection moulding machines as follows:
a) - Tonnage of machine: 100 to 150 Ton
- Budget: INR 6,00,000 to 7,00,000
b) - Tonnage of machine: 60 to 80 Ton
- Bud
For more details on Upto 150 Injection Moulding Machine click here
a) - Tonnage of machine: 100 to 150 Ton
- Budget: INR 6,00,000 to 7,00,000
b) - Tonnage of machine: 60 to 80 Ton
- Bud
For more details on Upto 150 Injection Moulding Machine click here
JSW 850 tons Injection Moulding Machine
Make: JSW (white body)
- Machine can be inspected at our works
- After sales service assured
(For more details and images, please see next pages)
For more details on JSW 850 tons Injection Moulding Machine click here
- Machine can be inspected at our works
- After sales service assured
(For more details and images, please see next pages)
For more details on JSW 850 tons Injection Moulding Machine click here
1000 Ton Injecion Moulding Machine
We are looking for 1000 ton or 1,200 Ton injection moulding machine as follows:
- Year: 2000 and above
- Low working hours
- Good Condition
For more details on 1000 Ton Injecion Moulding Machine click here
- Year: 2000 and above
- Low working hours
- Good Condition
For more details on 1000 Ton Injecion Moulding Machine click here
Ferromatik 110 Ton Injection Moulding Machine
- Type: FM 110
- Engine type injection molding machine to 5000 kn
Technical Details:
- Screw diameter: 40 mm
- 125 g shot weight in polystyrene
- Clamping force of: 1100 KN
Injection unit:
- Screw diameter: 40 mm
- Displacement :150 cm ³
- 125 g shot weight in polystyrene / PS
- Injection pressure of: 2400 bar
Closing:
- Clamping force of: 110 ton
- Distance between tie bars H x V 380 x 380 mm
- Mould height min: 250 mm
- Mould height max mm
- Opening stroke: :450 mm
Control:
- Microprocessor control PMC: 1000
- Digital control
- Screen Text German / German
- Manual German / German
Equipment:
- FHK-robot interface for yes / yes
- Core pulling
- Screw retraction yes / yes
General Information
- Pump drive power: 22.
For more details on Ferromatik 110 Ton Injection Moulding Machine click here
- Engine type injection molding machine to 5000 kn
Technical Details:
- Screw diameter: 40 mm
- 125 g shot weight in polystyrene
- Clamping force of: 1100 KN
Injection unit:
- Screw diameter: 40 mm
- Displacement :150 cm ³
- 125 g shot weight in polystyrene / PS
- Injection pressure of: 2400 bar
Closing:
- Clamping force of: 110 ton
- Distance between tie bars H x V 380 x 380 mm
- Mould height min: 250 mm
- Mould height max mm
- Opening stroke: :450 mm
Control:
- Microprocessor control PMC: 1000
- Digital control
- Screen Text German / German
- Manual German / German
Equipment:
- FHK-robot interface for yes / yes
- Core pulling
- Screw retraction yes / yes
General Information
- Pump drive power: 22.
For more details on Ferromatik 110 Ton Injection Moulding Machine click here
Niigata 55 Ton Injection Moulding Machine
Model: NE55UA
- Shot size: 3.03oz
- Shot size grams: 85
- Tie Bar Spacing: 12.2" x 12.2"
- Platen size: 18.11" x 18.11"
- Clamp Type: Toggle
- Control: Niigata
- Voltage: 480
- Min/Maax Mold Height: 6.
For more details on Niigata 55 Ton Injection Moulding Machine click here
- Shot size: 3.03oz
- Shot size grams: 85
- Tie Bar Spacing: 12.2" x 12.2"
- Platen size: 18.11" x 18.11"
- Clamp Type: Toggle
- Control: Niigata
- Voltage: 480
- Min/Maax Mold Height: 6.
For more details on Niigata 55 Ton Injection Moulding Machine click here
Thursday, June 16, 2011
80 Ton Injection Moulding Machine
We require 80 to 90 Ton used injection moulding m/c of make Feromatik Milacron India or Electronica in good working condition.
For more details on 80 Ton Injection Moulding Machine click here
For more details on 80 Ton Injection Moulding Machine click here
Sandretto Injection Molding Machines for Polycarbonate
We are looking for Sandretto machines as follows:
- Toggle type
- 80 or 100 ton, 175ton, 200ton and 250 ton - Sandretto or any reputed make
- We use polycarbonate material only so injection pressuures should be on higher side
- Clamping to be TOGGLE only.
For more details on Sandretto Injection Molding Machines for Polycarbonate click here
- Toggle type
- 80 or 100 ton, 175ton, 200ton and 250 ton - Sandretto or any reputed make
- We use polycarbonate material only so injection pressuures should be on higher side
- Clamping to be TOGGLE only.
For more details on Sandretto Injection Molding Machines for Polycarbonate click here
Monday, June 13, 2011
Demag Toggle Clamp Injection Molding Machines
Model: D85NCII
- Clamping Force: 85 Ton
- Shot weight: 3.5 oz.
- Screw diameter: 32mm
- Distance between tie bars: 14.25" X 14.25" (362 mm x 362 mm)
- Platen size: 21.75" X 21" (552 mm x 533 mmm)
- Shut height: 7.
For more details on Demag Toggle Clamp Injection Molding Machines click here
- Clamping Force: 85 Ton
- Shot weight: 3.5 oz.
- Screw diameter: 32mm
- Distance between tie bars: 14.25" X 14.25" (362 mm x 362 mm)
- Platen size: 21.75" X 21" (552 mm x 533 mmm)
- Shut height: 7.
For more details on Demag Toggle Clamp Injection Molding Machines click here
Engel 150 Injection Moulding Machine
Model: ES700
- Screw diameter: 45mm
- Max. Stroke volume: 318cm3
- Max. Injection weight: 287g
- Injection Pressure: 1700mm
- Heating capacity: 10.3kW
- Clamping force: 1500 KN
- Opening slrok
For more details on Engel 150 Injection Moulding Machine click here
- Screw diameter: 45mm
- Max. Stroke volume: 318cm3
- Max. Injection weight: 287g
- Injection Pressure: 1700mm
- Heating capacity: 10.3kW
- Clamping force: 1500 KN
- Opening slrok
For more details on Engel 150 Injection Moulding Machine click here
Engel 150 Ton Injection Moulding Machine
Model: ES 600
- Clamping force: 150 Ton
- Screw Diameter: 45mm
- Control: EC88
- Shot volume: 318 cm3
- Maximum injection weight: 287 g
- Injection pressure: 1400 bar
- Nozzle stroke: 300mm
- Nozzle Force: 58 KN
- Heating capacity: 11.
For more details on Engel 150 Ton Injection Moulding Machine click here
- Clamping force: 150 Ton
- Screw Diameter: 45mm
- Control: EC88
- Shot volume: 318 cm3
- Maximum injection weight: 287 g
- Injection pressure: 1400 bar
- Nozzle stroke: 300mm
- Nozzle Force: 58 KN
- Heating capacity: 11.
For more details on Engel 150 Ton Injection Moulding Machine click here
Demag 125 ton Injection Moulding Machine
- Screw diameter: 38mm
- Injection volume: 180 cm³
- Injection Pressure: 2.490 bar
- Distance between tie bars: 460 x 460mm
- Distance between platens: 880mm
- Hydraulic pump(s) / heaters: 22 / 14 kW
- Dimensions (L x W x H): 5.
For more details on Demag 125 ton Injection Moulding Machine click here
- Injection volume: 180 cm³
- Injection Pressure: 2.490 bar
- Distance between tie bars: 460 x 460mm
- Distance between platens: 880mm
- Hydraulic pump(s) / heaters: 22 / 14 kW
- Dimensions (L x W x H): 5.
For more details on Demag 125 ton Injection Moulding Machine click here
Thursday, May 26, 2011
400 Ton Mir RMPE Injection Moulding Machine
Accessories:
- Interface robot
- Tires Cores PM
- Noyo hydraulic PM
- Noyo hydraulic PF
- Electric motor with the load
- Proportional to expulsion central
- Deputy photo machine
(For picture
For more details on 400 Ton Mir RMPE Injection Moulding Machine click here
- Interface robot
- Tires Cores PM
- Noyo hydraulic PM
- Noyo hydraulic PF
- Electric motor with the load
- Proportional to expulsion central
- Deputy photo machine
(For picture
For more details on 400 Ton Mir RMPE Injection Moulding Machine click here
HPM 110 Ton Injection Moulding Machine
Model T110-6.5
- Shot size: 6.5 oz.
- Tie bar spacing: 17" x 14.68"
- Platen size: 22.52" x 24.29"
- Daylight: 27"
- Clamp stroke: 12"
- Mold thickness: 6"/15"
(For picture, please see
For more details on HPM 110 Ton Injection Moulding Machine click here
- Shot size: 6.5 oz.
- Tie bar spacing: 17" x 14.68"
- Platen size: 22.52" x 24.29"
- Daylight: 27"
- Clamp stroke: 12"
- Mold thickness: 6"/15"
(For picture, please see
For more details on HPM 110 Ton Injection Moulding Machine click here
Krauss Maffei 2-Shot 110 Ton Injection Moulding Machine
Model: KM110-220/60CL
- Shot size: 2.48/2.48 oz.
- Tie bar spacing: 18.5" x 18.5"
- Daylight: 30"
- Clamp stroke: 18.57"
- Mold thickness: 6.63"/22"
Equipped With:
- Robot Interface
For more details on Krauss Maffei 2-Shot 110 Ton Injection Moulding Machine click here
- Shot size: 2.48/2.48 oz.
- Tie bar spacing: 18.5" x 18.5"
- Daylight: 30"
- Clamp stroke: 18.57"
- Mold thickness: 6.63"/22"
Equipped With:
- Robot Interface
For more details on Krauss Maffei 2-Shot 110 Ton Injection Moulding Machine click here
Van Dorn 120 Ton Injection Moulding Machine
Model: 120RS-3FHT
Shot size: 3 oz.
- Tie bar spacing: 17" x 17"
- Platen size: 25" x 25"
- Daylight: 30"
- Clamp stroke: 14"
- Mold thickness: 6" Min.
- Voltage: 230/460
Features:
Eqquipped With:
- Pathfinder Control
- Air Blow
- Hydraulic K.
For more details on Van Dorn 120 Ton Injection Moulding Machine click here
Shot size: 3 oz.
- Tie bar spacing: 17" x 17"
- Platen size: 25" x 25"
- Daylight: 30"
- Clamp stroke: 14"
- Mold thickness: 6" Min.
- Voltage: 230/460
Features:
Eqquipped With:
- Pathfinder Control
- Air Blow
- Hydraulic K.
For more details on Van Dorn 120 Ton Injection Moulding Machine click here
Sigma-400 Ton Injection Moulding Machine
- Tiebar distance: 735 x 735 mm
- Min/max. Mold height:250/700 mm
- Clamp stoke: 650 mm
- Max daylight:1350mm
- Screw dia: 80 mm
- Shot capacity: 2179 gms (P.S)
- Ele. Motor: 60 H.P
- With var
For more details on Sigma-400 Ton Injection Moulding Machine click here
- Min/max. Mold height:250/700 mm
- Clamp stoke: 650 mm
- Max daylight:1350mm
- Screw dia: 80 mm
- Shot capacity: 2179 gms (P.S)
- Ele. Motor: 60 H.P
- With var
For more details on Sigma-400 Ton Injection Moulding Machine click here
Intertech 120 Ton Injection Moulding Machine
Model: EN120
- Shot size: 6 oz.
- Tie bar Spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features
Equipped With:
- EMPC Easy Micr
For more details on Intertech 120 Ton Injection Moulding Machine click here
- Shot size: 6 oz.
- Tie bar Spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features
Equipped With:
- EMPC Easy Micr
For more details on Intertech 120 Ton Injection Moulding Machine click here
Van Dorn/Trubor 125 Ton Injection Moulding Machine
- Shot size: 9 oz
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Equipped with:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hydraulic clamp
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Equipped with:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hydraulic clamp
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
Intertech 120 Ton Injection Moulding Machine
Model: EN120
- Shot size: 6 oz.
- Tie bar spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features:
Equipped With:
- EMPC Easy Mic
For more details on Intertech 120 Ton Injection Moulding Machine click here
- Shot size: 6 oz.
- Tie bar spacing: 14.3" x 14.3"
- Platen size: 23.4" x 23.4"
- Mold thickness: 4.9"/14.9"
- Voltage: 480 Volt
Features:
Equipped With:
- EMPC Easy Mic
For more details on Intertech 120 Ton Injection Moulding Machine click here
Van Dorn/Trubor 125 Ton Injection Moulding Machine
- Shot size: 9 oz.
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Features:
Equipped With:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hyd
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
- Tie bar spacing: 18.25" x 18.25"
- Platen size: 31-3/4" x 29-1/2"
- Voltage: 230-460/3/60
Features:
Equipped With:
- Hydraulic K.O.
- SCI Pathfinder Control
- Hyd
For more details on Van Dorn/Trubor 125 Ton Injection Moulding Machine click here
Reed 150 Ton Injection Moulding Machine
Model: 150TG
- Shot Size: 10.5 oz
- Tie bar spacing: 17" x 17"
- Platen size: 25.5" x 25.5"
- Daylight: 32.88"
- Clamp stroke: 15.88"
- Mold thickness: 4.625"/17"
Equipped With::
- P
For more details on Reed 150 Ton Injection Moulding Machine click here
- Shot Size: 10.5 oz
- Tie bar spacing: 17" x 17"
- Platen size: 25.5" x 25.5"
- Daylight: 32.88"
- Clamp stroke: 15.88"
- Mold thickness: 4.625"/17"
Equipped With::
- P
For more details on Reed 150 Ton Injection Moulding Machine click here
Wednesday, May 18, 2011
Battenfeld 350 ton Injection Moulding Machine
Injection Unit
- Screw diameter: 55mm
- Maximum Injection Pressure: 2482 bar
- Swept Volume: 772 cm
- Maximum Shot Weight GPS: 703 grams
- Maximum Shot Weight PE: 548 grams
- Screw L/D ratiio: 22 plasticising
- Capacity: grams/sec 52
- Injection Rate cm?/sec 249
- Maximum Injection Stroke mm 325
- Screw Speed min -1 285
- Nozzle Contact Force KN 140
- Injection Carriage Stroke mm 500
- Barrel Heating Capacity kw 22.
For more details on Battenfeld 350 ton Injection Moulding Machine click here
- Screw diameter: 55mm
- Maximum Injection Pressure: 2482 bar
- Swept Volume: 772 cm
- Maximum Shot Weight GPS: 703 grams
- Maximum Shot Weight PE: 548 grams
- Screw L/D ratiio: 22 plasticising
- Capacity: grams/sec 52
- Injection Rate cm?/sec 249
- Maximum Injection Stroke mm 325
- Screw Speed min -1 285
- Nozzle Contact Force KN 140
- Injection Carriage Stroke mm 500
- Barrel Heating Capacity kw 22.
For more details on Battenfeld 350 ton Injection Moulding Machine click here
Battenfeld 350Ton Injection Moulding Machine
Model: BA 3500/1200BK
Type of Lock: Toggle
Injection Unit
Screw diameter: 50mm
- Maximum injection pressure:2205 bar
- Swept Volume: 540cm
- Maximum shot weight GPS : 491grms
- Maximumm shot weight PE: 383 grms
- Screw L/D ratio: 22 Plasticising
- Capacity: 50grms sec
- Injection Rate: 237cm/sec
- Maximum injection stroke: 275mm
- screw speed:1 345min
- Nozzle contact force:140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity:20.
For more details on Battenfeld 350Ton Injection Moulding Machine click here
Type of Lock: Toggle
Injection Unit
Screw diameter: 50mm
- Maximum injection pressure:2205 bar
- Swept Volume: 540cm
- Maximum shot weight GPS : 491grms
- Maximumm shot weight PE: 383 grms
- Screw L/D ratio: 22 Plasticising
- Capacity: 50grms sec
- Injection Rate: 237cm/sec
- Maximum injection stroke: 275mm
- screw speed:1 345min
- Nozzle contact force:140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity:20.
For more details on Battenfeld 350Ton Injection Moulding Machine click here
Battenfeld 270 Ton Injecton Moulding Machine
Model: BA 2700/1200BK
Type of Lock: Toggle
Injection Unit:
- Screw Diameter: 50mm
- Maximum Injection Pressure: 2205 bar
- Swept Volume : 540cm
- Maximum shot weight GPS 491 :grams
- Maaximum Shot Weight PE : 383 grams
- Screw L/D ratio: 22
- Plasticising Capacity: 50 grams/sec
- Injection Rate : 237 cm/sec
- Maximum injection stroke: 275mm
- Screw speed :1 345mm
- Nozzle contact force : 140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity : 20.
For more details on Battenfeld 270 Ton Injecton Moulding Machine click here
Type of Lock: Toggle
Injection Unit:
- Screw Diameter: 50mm
- Maximum Injection Pressure: 2205 bar
- Swept Volume : 540cm
- Maximum shot weight GPS 491 :grams
- Maaximum Shot Weight PE : 383 grams
- Screw L/D ratio: 22
- Plasticising Capacity: 50 grams/sec
- Injection Rate : 237 cm/sec
- Maximum injection stroke: 275mm
- Screw speed :1 345mm
- Nozzle contact force : 140kn
- Injection carriage stroke: 500mm
- Barrel heating capacity : 20.
For more details on Battenfeld 270 Ton Injecton Moulding Machine click here
Oima 360 Ton Injection Moulding Machine
- Description: ECO2000
- Tonnage: 360 ton Screw
- Dia: 75mm
- Shot Weight: 1503grams
- Distanc between tie bar: 632 X 632mm
- Air Circuits 2 Hours: 9.398 6 X accumulators
( For image, ple
For more details on Oima 360 Ton Injection Moulding Machine click here
- Tonnage: 360 ton Screw
- Dia: 75mm
- Shot Weight: 1503grams
- Distanc between tie bar: 632 X 632mm
- Air Circuits 2 Hours: 9.398 6 X accumulators
( For image, ple
For more details on Oima 360 Ton Injection Moulding Machine click here
Husky 500 Ton Injection Moulding Machine
- Distance between Tie bars: 920 x 920 mm
- Platen size: 1306 x 1333 mm
- Ejector stroke: 150 mm
- Mould shut height: 500-1100 mm
- Injection pressure: 2,200 bar
- Injection stroke (max): 30
For more details on Husky 500 Ton Injection Moulding Machine click here
- Platen size: 1306 x 1333 mm
- Ejector stroke: 150 mm
- Mould shut height: 500-1100 mm
- Injection pressure: 2,200 bar
- Injection stroke (max): 30
For more details on Husky 500 Ton Injection Moulding Machine click here
MIR 95 Ton Injection Moulding Machine
Model:MIR MMP 98/120 TWIN SHOT
Mir 2 colour/component machine twin barrels · lock
- Distance between tie bars: 370 X 370 mm
- Between nozzle centres : 200mm
- Register ring - 2 X 100 mm
- Moulld height: 200 - 290 mm
- Moving platen stroke :380 mm
- Screw dia: 34 mmX2
- L:D ratio: 21:1
- Max shot wt.
For more details on MIR 95 Ton Injection Moulding Machine click here
Mir 2 colour/component machine twin barrels · lock
- Distance between tie bars: 370 X 370 mm
- Between nozzle centres : 200mm
- Register ring - 2 X 100 mm
- Moulld height: 200 - 290 mm
- Moving platen stroke :380 mm
- Screw dia: 34 mmX2
- L:D ratio: 21:1
- Max shot wt.
For more details on MIR 95 Ton Injection Moulding Machine click here
Tuesday, May 17, 2011
Sandretto Micro 40 Ton Injection Moulding Machine
Model: Sandretto Micro 400-107
- Microprocessor tonnage: 40 ton screw
- Dia: 24mm
- Shot Weigh: 50grams
- Distance tie bar: 305 X 305mm
- Core pull:1
- Air circuits:1 c/w
- Dal maschio spprue picker hours: 50.
For more details on Sandretto Micro 40 Ton Injection Moulding Machine click here
- Microprocessor tonnage: 40 ton screw
- Dia: 24mm
- Shot Weigh: 50grams
- Distance tie bar: 305 X 305mm
- Core pull:1
- Air circuits:1 c/w
- Dal maschio spprue picker hours: 50.
For more details on Sandretto Micro 40 Ton Injection Moulding Machine click here
Engle 25 Ton Injection Moulding Machine
Model:ES80
- CC88 Comtrol
- Hours run: 52733, 265x265
- Distance Tie bar: 1.5 ton weight number
(For picture please see next, page)
For more details on Engle 25 Ton Injection Moulding Machine click here
- CC88 Comtrol
- Hours run: 52733, 265x265
- Distance Tie bar: 1.5 ton weight number
(For picture please see next, page)
For more details on Engle 25 Ton Injection Moulding Machine click here
Friday, May 06, 2011
Husky 1000 Ton Injection Moulding Mavchine
- Tie bar spacing: 74.8" (v) x 59.1" (w)
- Platen size: 86.6" (W) x 73.2" (V)
- Clamp stroke: 94.5"
- Max daylight: 126"
- Min/max shut height: 31.5" Min; 95" Max
- Tie Bar diameter: 9"
- Screw diameter: 5.
For more details on Husky 1000 Ton Injection Moulding Machine click here
- Platen size: 86.6" (W) x 73.2" (V)
- Clamp stroke: 94.5"
- Max daylight: 126"
- Min/max shut height: 31.5" Min; 95" Max
- Tie Bar diameter: 9"
- Screw diameter: 5.
For more details on Husky 1000 Ton Injection Moulding Machine click here
Toyo 90 Ton Injection Moulding Machine
Model: TI-90G2
- Shot size:.5.5 Oz
- Shot size grams: 155.92225
- Tie bar spacing: 14.76" x 14.76"
- Platen size: 21.26" x 20.67"
- Daylight: 13.78"
- Control: PLCS-6
- Screw diameter: 1.57"
-- Amps: 75
- HP: 25
- Ejector stroke: 3.
For more details on Toyo 90 Ton Injection Moulding Machine click here
- Shot size:.5.5 Oz
- Shot size grams: 155.92225
- Tie bar spacing: 14.76" x 14.76"
- Platen size: 21.26" x 20.67"
- Daylight: 13.78"
- Control: PLCS-6
- Screw diameter: 1.57"
-- Amps: 75
- HP: 25
- Ejector stroke: 3.
For more details on Toyo 90 Ton Injection Moulding Machine click here
Sumitomo 100 Ton Injection Moulding Machine
Model: SH100C
- Tie bar spacing: 16.14" x 16.14"
- Platen size: 16.14" x 24.02"
- Clamp type: Hydromechanical
- Screw diameter: 36 mm
- Voltage: 460/30/60
- Injection unit size: 163 ccm (C160)
For more details on Sumitomo 100 Ton Injection Moulding Machine click here
- Tie bar spacing: 16.14" x 16.14"
- Platen size: 16.14" x 24.02"
- Clamp type: Hydromechanical
- Screw diameter: 36 mm
- Voltage: 460/30/60
- Injection unit size: 163 ccm (C160)
For more details on Sumitomo 100 Ton Injection Moulding Machine click here
Cincinnati Milacron 110 Ton Injection Moulding Machine
Model: VT110-8
- Shot size: 7.87 Oz
- Shot size grams: 223.110565
- Tie bar spacing: 15.74" x 18.50"
- Daylight: 35.43"
- Clamp type: Toggle
- Screw diameter: 40 mm
- Voltage: 480
- Ejector sttroke: 3.
For more details on Cincinnati Milacron 110 Ton Injection Moulding Machine click here
- Shot size: 7.87 Oz
- Shot size grams: 223.110565
- Tie bar spacing: 15.74" x 18.50"
- Daylight: 35.43"
- Clamp type: Toggle
- Screw diameter: 40 mm
- Voltage: 480
- Ejector sttroke: 3.
For more details on Cincinnati Milacron 110 Ton Injection Moulding Machine click here
Tuesday, May 03, 2011
850 Ton Injection Moulding Machine
We are looking for 850 ton injection moulding machine as follows:
- Preferred Brands - JSW/ Toshiba/ Mitsubishi
- Acceptable age: 10 years old
- Platen size: 1060 x 1060
- Locking type: Toggle
-
For more details on 850 Ton Injection Moulding Machine click here
- Preferred Brands - JSW/ Toshiba/ Mitsubishi
- Acceptable age: 10 years old
- Platen size: 1060 x 1060
- Locking type: Toggle
-
For more details on 850 Ton Injection Moulding Machine click here
Engel 200 Ton Injection Moulding Machine
Model:E-motion EM740/200 All Electric (Tiebarless)
- Shot size:10.3 Oz
- Shot size grams: 291.99985
- Platen size:37.40" x 29.53"
- Daylight:37.41"
- Screw diameter:45mm
- Clamp stroke:17.72"
-- Voltage: 460
- Injection unit size:19.
For more details on Engel 200 Ton Injection Moulding Machine click here
- Shot size:10.3 Oz
- Shot size grams: 291.99985
- Platen size:37.40" x 29.53"
- Daylight:37.41"
- Screw diameter:45mm
- Clamp stroke:17.72"
-- Voltage: 460
- Injection unit size:19.
For more details on Engel 200 Ton Injection Moulding Machine click here
Krauss Maffei 320 Ton Injection Moulding Machine
Model: KM320-1900C3
- Platen size: 41.73" x 43.11"
- Distance between tie-bars: 27.95" x 27.95" - Maximum daylight: 51.18"
- Clamp stroke: 36.22"
- Screw diameter: 60mm
- Weight: 35,000 lbs
Equipped With:
- MC-4 control
- Two platen design
- 24.
For more details on Krauss Maffei 320 Ton Injection Moulding Machine click here
- Platen size: 41.73" x 43.11"
- Distance between tie-bars: 27.95" x 27.95" - Maximum daylight: 51.18"
- Clamp stroke: 36.22"
- Screw diameter: 60mm
- Weight: 35,000 lbs
Equipped With:
- MC-4 control
- Two platen design
- 24.
For more details on Krauss Maffei 320 Ton Injection Moulding Machine click here
Niigata 50 ton Injection Moulder
Model: CN-50
- Screw stroke: 100 mm
- Screw diameter: 30 mm
- Shot weight (PS): 58 gms.
- Injection pressure: 2030 Kg/cm2
Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 250 mm
- Minn.
For more details on Niigata 50 ton Injection Moulder click here
- Screw stroke: 100 mm
- Screw diameter: 30 mm
- Shot weight (PS): 58 gms.
- Injection pressure: 2030 Kg/cm2
Locking side:
- Clamp mechanism: Toggle
- Clamp stroke: 250 mm
- Minn.
For more details on Niigata 50 ton Injection Moulder click here
Monday, April 18, 2011
100 tons Injection Moulding Machine
We are looking for 100 tons injection moulding machine as follows:
- Preferred brand: Japanese
- Locking type: Toggle
- Acceptable age: Over year 1995
- Budget: INR 8,00,000
For more details on 100 tons Injection Moulding Machine click here
- Preferred brand: Japanese
- Locking type: Toggle
- Acceptable age: Over year 1995
- Budget: INR 8,00,000
For more details on 100 tons Injection Moulding Machine click here
400 tons Injection Moulding Machines
We are looking for injection moulding machines over 400 tons.
- Platen aperture for our mold needed is 57 inch or 1440 mm
- Clamp stroke 30 inches or 760 mm
- Minimum mold less than 27 inch or 675 mm
- Plasticizing capacity: 1 kg or more.
For more details on 400 tons Injection Moulding Machines click here
- Platen aperture for our mold needed is 57 inch or 1440 mm
- Clamp stroke 30 inches or 760 mm
- Minimum mold less than 27 inch or 675 mm
- Plasticizing capacity: 1 kg or more.
For more details on 400 tons Injection Moulding Machines click here
ChenPET 650 ton Injection Moulding Machine
Model: ChenPET JM 650 C
- Complete system with 4 cavity 20 liter preform mould
- Machine is brand new, the boxes are also not opened.
- This machine can be used for manufacturing of general purposee plastic items like chairs, drums, crates and laundry baskets etc.
For more details on ChenPET 650 ton Injection Moulding Machine click here
- Complete system with 4 cavity 20 liter preform mould
- Machine is brand new, the boxes are also not opened.
- This machine can be used for manufacturing of general purposee plastic items like chairs, drums, crates and laundry baskets etc.
For more details on ChenPET 650 ton Injection Moulding Machine click here
Recondition machine for PET Preforms and RPVC Pipes
We are interested in buying second hand recondition, refurbished machines for applications in PET preforms injection moulding and RPVC pipe fittings.
- Tonnage: 130 and 150 ton
- Preferred brands: C
For more details on Recondition machine for PET Preforms and RPVC Pipes click here
- Tonnage: 130 and 150 ton
- Preferred brands: C
For more details on Recondition machine for PET Preforms and RPVC Pipes click here
Mitsubishi 90 ton Injection Moulder
Model: 90MJII
- Shot size: 5 oz.
- Clamp style: Hydraulic
- Tie bar distance (H x V): 14.9" x 14.9"
- Platen size (H x V): 22.05" x 22.05"
- Daylight: Min: 7.1"; max: 24.8"
- Dimension (L x W x H): 168.
For more details on Mitsubishi 90 ton Injection Moulder click here
- Shot size: 5 oz.
- Clamp style: Hydraulic
- Tie bar distance (H x V): 14.9" x 14.9"
- Platen size (H x V): 22.05" x 22.05"
- Daylight: Min: 7.1"; max: 24.8"
- Dimension (L x W x H): 168.
For more details on Mitsubishi 90 ton Injection Moulder click here
195 ton Ferromatik Milacron Injection Molding Machine
Model: K175S/2F
- Platen size: 33.00" x 33.00"
- Distance between tie bars: 22.00" x 22.00"
- Max. die opening: 40"
- Screw diameter: 40 mm
- Machine dimensions: 26'l x 7'w x 7'6"h
- Machine weeight: 28,219 lbs
Equipped with:
- 4.
For more details on 195 ton Ferromatik Milacron Injection Molding Machine click here
- Platen size: 33.00" x 33.00"
- Distance between tie bars: 22.00" x 22.00"
- Max. die opening: 40"
- Screw diameter: 40 mm
- Machine dimensions: 26'l x 7'w x 7'6"h
- Machine weeight: 28,219 lbs
Equipped with:
- 4.
For more details on 195 ton Ferromatik Milacron Injection Molding Machine click here
Engel 60 ton Liquid Silicone Machine
Model: EC 80-60 TL
- No. of machines: 5
- Shot size: 3.2 oz.
- Platen size: 25.60" x 16.93"
- Min./max. daylight: 7.48" - 20.47"
- Min./max. mold HT: 7.48"/NA
- Clamp stroke: 13"
- Ejector strooke: 3.
For more details on Engel 60 ton Liquid Silicone Machine click here
- No. of machines: 5
- Shot size: 3.2 oz.
- Platen size: 25.60" x 16.93"
- Min./max. daylight: 7.48" - 20.47"
- Min./max. mold HT: 7.48"/NA
- Clamp stroke: 13"
- Ejector strooke: 3.
For more details on Engel 60 ton Liquid Silicone Machine click here
Van Dorn 500 ton Injection Moulder
Model: 500HT-RS-60F-HS
- Shot size: 60 oz.
- Platen size: 47" x 47"
- Distance between tie bars: 36.5" X 36.5"
(For picture, please see next page)
For more details on Van Dorn 500 ton Injection Moulder click here
- Shot size: 60 oz.
- Platen size: 47" x 47"
- Distance between tie bars: 36.5" X 36.5"
(For picture, please see next page)
For more details on Van Dorn 500 ton Injection Moulder click here
Sandretto Series Otto Advantage 175 ton Injection Moulder
Model: 430/175
- Approximate 3-3/4'' diameter tie bars,
- Distance between bars: 20-1/4" x 20-1/4"
- Platen size: 30" x 30"
- Locking type: Toggle
- Operator control panel
(For images, pleas
For more details on Sandretto Series Otto Advantage 175 ton Injection Moulder click here
- Approximate 3-3/4'' diameter tie bars,
- Distance between bars: 20-1/4" x 20-1/4"
- Platen size: 30" x 30"
- Locking type: Toggle
- Operator control panel
(For images, pleas
For more details on Sandretto Series Otto Advantage 175 ton Injection Moulder click here
Saturday, February 12, 2011
Engel 900 Ton Injection Moulding Machine
Model: ES7050/800-900K
- Distance between tie-bars (h x v): 1120 mm x 1025 mm
- Opening stroke: 1000 mm
- Mould height min: 400 mm
- Mould height max: 1000 mm
- Screw diameter: 120 mm
- For mateerial: Thermoplast
- Injection pressure: 1260 bar
- Max.
For more details on Engel 900 Ton Injection Moulding Machine click here
- Distance between tie-bars (h x v): 1120 mm x 1025 mm
- Opening stroke: 1000 mm
- Mould height min: 400 mm
- Mould height max: 1000 mm
- Screw diameter: 120 mm
- For mateerial: Thermoplast
- Injection pressure: 1260 bar
- Max.
For more details on Engel 900 Ton Injection Moulding Machine click here
850 to 1100 ton Injection Moulding Machine
We are looking for 850 to 1100 ton injection moulding machine as follows:
- Preferred brand: Krauss Maffei, Toshiba, Mitsubishi and Engel
- Acceptable age: Above year 2003
For more details on 850 to 1100 ton Injection Moulding Machine click here
- Preferred brand: Krauss Maffei, Toshiba, Mitsubishi and Engel
- Acceptable age: Above year 2003
For more details on 850 to 1100 ton Injection Moulding Machine click here
360 to 400 ton Injection Moulding Machine
We are looking for 360 to 400 ton injection moulding machine as follows:
- Preferred brands: Windsor or Cincinnati
- Acceptable age: Above year 2000
For more details on 360 to 400 ton Injection Moulding Machine click here
- Preferred brands: Windsor or Cincinnati
- Acceptable age: Above year 2000
For more details on 360 to 400 ton Injection Moulding Machine click here
Tuesday, February 08, 2011
JSW J650E Injection Moulding Machines
- Clamping Force: 650 Ton
- No. of machines: 3
- Year of manufacture:
a. 1995
b. 1994
c. 1991
- Screw Diameter: 92 mm
- Injection Pressure: 1820 kgf/cm2
- Shot Volume: 3190 cm3
- Clamp Stroke
For more details on JSW J650E Injection Moulding Machines click here
- No. of machines: 3
- Year of manufacture:
a. 1995
b. 1994
c. 1991
- Screw Diameter: 92 mm
- Injection Pressure: 1820 kgf/cm2
- Shot Volume: 3190 cm3
- Clamp Stroke
For more details on JSW J650E Injection Moulding Machines click here
JSW J850E Injection Moulding Machine, 1995
- Clamping Force: 850 Ton
- Screw Diameter: 110 mm
- Injection Pressure: 1720 kgf/cm2
- Shot Volume: 5034cm3
- Clamp Stroke: 1200 mm
- Distance between tie bars: 1060 mm x 1060 mm
- Mold Thickne
For more details on JSW J850E Injection Moulding Machine, 1995 click here
- Screw Diameter: 110 mm
- Injection Pressure: 1720 kgf/cm2
- Shot Volume: 5034cm3
- Clamp Stroke: 1200 mm
- Distance between tie bars: 1060 mm x 1060 mm
- Mold Thickne
For more details on JSW J850E Injection Moulding Machine, 1995 click here
775 to 850 ton Injection Moulding Machine
We are looking for 775 to 850 ton injection moulding machine
- Preferred brand: Cincinnati
- Acceptable age: Above year 2003
- Target price: INR 45,00,000
For more details on 775 to 850 ton Injection Moulding Machine click here
- Preferred brand: Cincinnati
- Acceptable age: Above year 2003
- Target price: INR 45,00,000
For more details on 775 to 850 ton Injection Moulding Machine click here
Upto 150 tons Injection Moulding Machines
We are looking for upto 150 tons injection moulding machines with the following specifications:
- Tonnage:
a. 50 tons - 2 nos.
b. 80 tons - 1 no.
c. 100 tons - 2 nos.
d. 150 tons - 1 no.
- Prefe
For more details on Upto 150 tons Injection Moulding Machines click here
- Tonnage:
a. 50 tons - 2 nos.
b. 80 tons - 1 no.
c. 100 tons - 2 nos.
d. 150 tons - 1 no.
- Prefe
For more details on Upto 150 tons Injection Moulding Machines click here
Margarit 400 ton Injection Moulding Machines
Margarit M-400/1335
- 3 units
- Size of mold platens: 1000 x 950 mm
- Distance between tie bars: 650 x 600 mm
- Diameter of the 4 columns: 125 mm
- Maximum mould opening: 700 mm
- Maximum mouldd opening stroke: 700 mm
- Minimum mould opening stroke: 350 mm
- Maximum distance between platens (machine opened): 1400 mm
- Effective front surface: 2000 cm2
- Maximum clamping power: 400 tm
- Hydraulic ejector-stroke: 220 mm
- Power hydraulic ejector-stroke: 8 T
- Ejector force forward/backward: 4.
For more details on Margarit 400 ton Injection Moulding Machines click here
- 3 units
- Size of mold platens: 1000 x 950 mm
- Distance between tie bars: 650 x 600 mm
- Diameter of the 4 columns: 125 mm
- Maximum mould opening: 700 mm
- Maximum mouldd opening stroke: 700 mm
- Minimum mould opening stroke: 350 mm
- Maximum distance between platens (machine opened): 1400 mm
- Effective front surface: 2000 cm2
- Maximum clamping power: 400 tm
- Hydraulic ejector-stroke: 220 mm
- Power hydraulic ejector-stroke: 8 T
- Ejector force forward/backward: 4.
For more details on Margarit 400 ton Injection Moulding Machines click here
Friday, January 28, 2011
Injection Moulding Machine for HDPE
We are looking for injection moulding machine for HDPE with the following specifications:
- 350 to 400 gms. shot weight
- Preffered local brands
- The machine should be in running condition
- Targ
For more details on Injection Moulding Machine for HDPE click here
- 350 to 400 gms. shot weight
- Preffered local brands
- The machine should be in running condition
- Targ
For more details on Injection Moulding Machine for HDPE click here
Injection Moulding Machine
We are looking for injection moulding machine with following specifications:
- Layout: Horizontal
- Capacity (Tons): 500 min - 750 max.
- Platen: 40" x 39" min
- Tie bar: 34" x 33" min
- Shot (oz
For more details on Injection Moulding Machine click here
- Layout: Horizontal
- Capacity (Tons): 500 min - 750 max.
- Platen: 40" x 39" min
- Tie bar: 34" x 33" min
- Shot (oz
For more details on Injection Moulding Machine click here
TMC 220 ton Injection Moulder
Model: 200 E
- Shot size: 32 oz
- Voltage: 230/460 - 60 Hz
- Amps: 74.6/37.3
- HP: 30
- Total installed power: 50 KW (approx)
- Die Height: 7.87" – 21.65"
- Platen Size: 29.92" x 29.92"
- Tie Bar Spacing: 19.
For more details on TMC 220 ton Injection Moulder click here
- Shot size: 32 oz
- Voltage: 230/460 - 60 Hz
- Amps: 74.6/37.3
- HP: 30
- Total installed power: 50 KW (approx)
- Die Height: 7.87" – 21.65"
- Platen Size: 29.92" x 29.92"
- Tie Bar Spacing: 19.
For more details on TMC 220 ton Injection Moulder click here
230 Ton Van Dorn Injection Moulding Machine
Model: 230HT1220
- Shot size: 25.4 oz.
- Platen Size: 32" x 32"
- Distance Between Tie Bars: 22" x 22"
- Tie bar Diameter: 3.75"
- Clamp Stroke: 20"
- Maximum Daylight: 42"
- Mold Thickness (Miin/Max): 7"
- Dimensions (Approx): 23'L x 66"W x 7'H
- Hours: 9,755
Equipped With:
- Optional 1220 Injection Unit: 25.
For more details on 230 Ton Van Dorn Injection Moulding Machine click here
- Shot size: 25.4 oz.
- Platen Size: 32" x 32"
- Distance Between Tie Bars: 22" x 22"
- Tie bar Diameter: 3.75"
- Clamp Stroke: 20"
- Maximum Daylight: 42"
- Mold Thickness (Miin/Max): 7"
- Dimensions (Approx): 23'L x 66"W x 7'H
- Hours: 9,755
Equipped With:
- Optional 1220 Injection Unit: 25.
For more details on 230 Ton Van Dorn Injection Moulding Machine click here
195 ton Ferromatik Milacron Injection Moulder
Model: KTEC175S
- Shot size: 9 oz.
- Platen Size: 33.00" x 33.00"
- Distance Between Tie Bars: 22.00" x 22.00"
- Max. Die Opening: 40"
- Screw Diameter: 40 mm
- Machine Dimensions: 26'L x 7'W x 8'6"H
- Machine Weight: 26,455 Lbs
Equipped with:
- 9 Oz.
For more details on 195 ton Ferromatik Milacron Injection Moulder click here
- Shot size: 9 oz.
- Platen Size: 33.00" x 33.00"
- Distance Between Tie Bars: 22.00" x 22.00"
- Max. Die Opening: 40"
- Screw Diameter: 40 mm
- Machine Dimensions: 26'L x 7'W x 8'6"H
- Machine Weight: 26,455 Lbs
Equipped with:
- 9 Oz.
For more details on 195 ton Ferromatik Milacron Injection Moulder click here
200 ton Chinese Injection Moulding Machine
We are looking for 200 ton injection moulding machine as follows:
- Acceptable age: Upto year 2003
- Preferred brands: Chinese or any good brand
- Locking type: Toggle
- Budget price: INR 10,00,00
For more details on 200 ton Chinese Injection Moulding Machine click here
- Acceptable age: Upto year 2003
- Preferred brands: Chinese or any good brand
- Locking type: Toggle
- Budget price: INR 10,00,00
For more details on 200 ton Chinese Injection Moulding Machine click here
150 to 200 tons Injection Moulding Machine
We are looking for 150 to 200 tons injection moulding machines as follows:
- Acceptable age: 10 years old
- Platen size: 300 x 300 mm
- Locking type: Toggle
- PLC controller required
- Budget pri
For more details on 150 to 200 tons Injection Moulding Machine click here
- Acceptable age: 10 years old
- Platen size: 300 x 300 mm
- Locking type: Toggle
- PLC controller required
- Budget pri
For more details on 150 to 200 tons Injection Moulding Machine click here
Horizontal Injection Moulding Machines upto 150 tons
We need 4 nos. horizontal injection moulding machines upto 150 tons for production of thermoplastics with the following specifications:
- Tonnage:
a) 80 ton
b) 100 tons - 2 nos.
c) Between 130 to
For more details on Horizontal Injection Moulding Machines upto 150 tons click here
- Tonnage:
a) 80 ton
b) 100 tons - 2 nos.
c) Between 130 to
For more details on Horizontal Injection Moulding Machines upto 150 tons click here
450 to 600 ton Injection Moulding Machine
We are looking for 450 to 600 ton injection moulding machine as follows:
- Acceptable age: Upto 10 years old
- Preferred brands: Cincinnati, Engel, Husky, Krauss Maffei
For more details on 450 to 600 ton Injection Moulding Machine click here
- Acceptable age: Upto 10 years old
- Preferred brands: Cincinnati, Engel, Husky, Krauss Maffei
For more details on 450 to 600 ton Injection Moulding Machine click here
900 to 1200 ton Injection Moulding Machine
We are looking for 900 to 1200 ton injection moulding machine as follows:
- Acceptable age: Upto 10 years old
- Preferred brands: Cincinnati, Engel, Husky, Krauss Maffei
For more details on 900 to 1200 ton Injection Moulding Machine click here
- Acceptable age: Upto 10 years old
- Preferred brands: Cincinnati, Engel, Husky, Krauss Maffei
For more details on 900 to 1200 ton Injection Moulding Machine click here
Subscribe to:
Posts (Atom)