Model: VL1000 Square
- Shot size: 181 oz.(125mm/c)
- Tie bar spacing: 44.09" x 44.09"
- Platen size: 62.99" x 62.99"
- Daylight: 92.5"
- Clamp stroke: 48"
Dimensions:
- Clamp: 26' L x 99.
For more details on 1000 Ton Cincinnati Injection Moulder click here
Friday, February 19, 2010
1150 Ton Goldstar Injection Moulder
Model: LGH-1150M
- Shot size: 162 oz.
- Tie bar spacing: 55.1" x 49.2"
- Platen size: 76.8" x 70.9"
- Daylight: 94.5"
- Clamp stroke: 70.9"
- Mold thickness: 23.6"/59.1"
Equipped with:
For more details on 1150 Ton Goldstar Injection Moulder click here
- Shot size: 162 oz.
- Tie bar spacing: 55.1" x 49.2"
- Platen size: 76.8" x 70.9"
- Daylight: 94.5"
- Clamp stroke: 70.9"
- Mold thickness: 23.6"/59.1"
Equipped with:
For more details on 1150 Ton Goldstar Injection Moulder click here
Thursday, February 18, 2010
500 Ton Toshiba Injection Moulder
Model: ISF500-34B
- Shot size: 76 oz.
- Tie bar spacing: 31.8" x 31.8"
- Platen size: 45.7" x 45.7"
- Daylight: 55.1"/15.8"
- Clamp stroke: 39"
Equipped with:
- Injectvisor VL control
For more details on 500 Ton Toshiba Injection Moulder click here
- Shot size: 76 oz.
- Tie bar spacing: 31.8" x 31.8"
- Platen size: 45.7" x 45.7"
- Daylight: 55.1"/15.8"
- Clamp stroke: 39"
Equipped with:
- Injectvisor VL control
For more details on 500 Ton Toshiba Injection Moulder click here
500 Ton Toshiba Injection Moulder
Model: IGGS500V10-27B
- Shot size: 63 oz.
- Tie bar spacing: 34.2" 31.8"
- Platen size: 48.4" x 45.6"
- Daylight: 55.1"/13.8"
Equipped with:
- Full hydraulic clamp
- V-10 control
- Du
For more details on 500 Ton Toshiba Injection Moulder click here
- Shot size: 63 oz.
- Tie bar spacing: 34.2" 31.8"
- Platen size: 48.4" x 45.6"
- Daylight: 55.1"/13.8"
Equipped with:
- Full hydraulic clamp
- V-10 control
- Du
For more details on 500 Ton Toshiba Injection Moulder click here
500 Ton Van Dorn HT Injection Moulder
Model: 500HT-60F
- Shot size: 60 oz.
- Tie bar spacing: 32.5" x 32.5"
- Platen size: 48" x 48"
- Daylight: 10"/60"
Equipped with:
- Pathfinder 2500 control
- Dual core pull
- Hydrauliic K.
For more details on 500 Ton Van Dorn HT Injection Moulder click here
- Shot size: 60 oz.
- Tie bar spacing: 32.5" x 32.5"
- Platen size: 48" x 48"
- Daylight: 10"/60"
Equipped with:
- Pathfinder 2500 control
- Dual core pull
- Hydrauliic K.
For more details on 500 Ton Van Dorn HT Injection Moulder click here
825 Ton Husky Injection Moulder
Model: LX750RS120/100
- Shot size: 108 oz.
- Tie bar spacing: 44.5" x 44.5"
- Daylight: 86.6"
- Clamp stroke: 43.3"
- Mold thickness: 43.3"
- Voltage: 460
(For images, please see next p
For more details on 825 Ton Husky Injection Moulder click here
- Shot size: 108 oz.
- Tie bar spacing: 44.5" x 44.5"
- Daylight: 86.6"
- Clamp stroke: 43.3"
- Mold thickness: 43.3"
- Voltage: 460
(For images, please see next p
For more details on 825 Ton Husky Injection Moulder click here
500 ton Van Dorn Injection Moulder
Model: 500HP80FLP
- Shot size: 80 oz.
- Tie bar spacing: 36.5" x 32.5"
- Platen size: 51" x 47"
- Daylight: 62"
- Clamp stroke: 40"
- Mold thickness: 12"/27.5"
Equipped with:
- Pathf
For more details on 500 ton Van Dorn Injection Moulder click here
- Shot size: 80 oz.
- Tie bar spacing: 36.5" x 32.5"
- Platen size: 51" x 47"
- Daylight: 62"
- Clamp stroke: 40"
- Mold thickness: 12"/27.5"
Equipped with:
- Pathf
For more details on 500 ton Van Dorn Injection Moulder click here
Monday, February 15, 2010
Thin Wall Injection Molding Machine
We need high pressure 225-250 tons injection moulding machine as follows:
- High injection pressure screw
- Our need is to manufacture plastic cones (textile industry) shot weight would be about 70 grams in PP (mold of 4 cavities each cone has a weight of 14 grams)
- And the other article would be plastic glasses shot weight max 150 grams in PS (mold of max 6 cavities each glass weight about 22 grams)
- Machine could be of an age around 10 years, and we are looking for Husky mainly or Nestal, to have high cycle.
For more details on Thin Wall Injection Molding Machine click here
- High injection pressure screw
- Our need is to manufacture plastic cones (textile industry) shot weight would be about 70 grams in PP (mold of 4 cavities each cone has a weight of 14 grams)
- And the other article would be plastic glasses shot weight max 150 grams in PS (mold of max 6 cavities each glass weight about 22 grams)
- Machine could be of an age around 10 years, and we are looking for Husky mainly or Nestal, to have high cycle.
For more details on Thin Wall Injection Molding Machine click here
JSW 850 Ton Injection Moulder
Model: J850E-C5
- Screw diameter: 120 mm
- Injection pressure: 1,440 kg/cm2
- Theoretical injection volume: 5,991 cm3
- Shot weight (PS): 5,452 g
- Injection rate: 1,010 cm3/sec
- Plasticizing ccapacity (PS): 530 kg/h
- Screw speed:
a.
For more details on JSW 850 Ton Injection Moulder click here
- Screw diameter: 120 mm
- Injection pressure: 1,440 kg/cm2
- Theoretical injection volume: 5,991 cm3
- Shot weight (PS): 5,452 g
- Injection rate: 1,010 cm3/sec
- Plasticizing ccapacity (PS): 530 kg/h
- Screw speed:
a.
For more details on JSW 850 Ton Injection Moulder click here
Hemscheidt 800 Ton Reconditioned Injection Moulder
Model: 800 H
- Shot weight (PS): Approx. 4,350 gram
- Screw diameter: 125 mm
- Tie bar distance: 950 x 950 mm
- Daylight: 2150 mm
Equipped with:
- Hydraulic ejector
- 2 cores
- Electronic Siiemens S 5
- Accumulator
Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.
For more details on Hemscheidt 800 Ton Reconditioned Injection Moulder click here
- Shot weight (PS): Approx. 4,350 gram
- Screw diameter: 125 mm
- Tie bar distance: 950 x 950 mm
- Daylight: 2150 mm
Equipped with:
- Hydraulic ejector
- 2 cores
- Electronic Siiemens S 5
- Accumulator
Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.
For more details on Hemscheidt 800 Ton Reconditioned Injection Moulder click here
Battenfeld 850 Ton Reconditioned Injection Moulder
Model: BA 8500/6300
- Shot weight (PS): Approx. 3,050 gram
- Screw diameter: 110 mm
- Tie bar distance: 900 x 900 mm
- Daylight: 1700 mm
Equipped with:
- Hydraulic ejector
- 2 cores
- Unilogg 4000 controller
- Accumulator
Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.
For more details on Battenfeld 850 Ton Reconditioned Injection Moulder click here
- Shot weight (PS): Approx. 3,050 gram
- Screw diameter: 110 mm
- Tie bar distance: 900 x 900 mm
- Daylight: 1700 mm
Equipped with:
- Hydraulic ejector
- 2 cores
- Unilogg 4000 controller
- Accumulator
Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.
For more details on Battenfeld 850 Ton Reconditioned Injection Moulder click here
Van Dorn 700 Ton Injection Moulder
Model: 700-HP-125F
- Shot size: 125 oz
- Tie bar spacing: 36.5" x 36.5"
- Max clamp stroke: 44"
- Max daylight: 72.75"
- Platen size: 62" x 53.5"
- Ejector stroke: 10.82"
Equipped with:
- P
For more details on Van Dorn 700 Ton Injection Moulder click here
- Shot size: 125 oz
- Tie bar spacing: 36.5" x 36.5"
- Max clamp stroke: 44"
- Max daylight: 72.75"
- Platen size: 62" x 53.5"
- Ejector stroke: 10.82"
Equipped with:
- P
For more details on Van Dorn 700 Ton Injection Moulder click here
Battenfeld 850 Ton Reconditioned Injection Moulder
Model: BA 8500/6300
- Shot weight (PS): Approx. 3,050 gram
- Screw diameter: 110 mm
- Tie bar distance: 900 x 900 mm
- Daylight: 1700 mm
Equipped with:
- Hydraulic ejector
- 2 cores
- Unilogg 4000 controller
- Accumulator
Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.
For more details on Battenfeld 850 Ton Reconditioned Injection Moulder click here
- Shot weight (PS): Approx. 3,050 gram
- Screw diameter: 110 mm
- Tie bar distance: 900 x 900 mm
- Daylight: 1700 mm
Equipped with:
- Hydraulic ejector
- 2 cores
- Unilogg 4000 controller
- Accumulator
Voltage: 380 to 420 volts, 50 cycles with central conductor and ground.
For more details on Battenfeld 850 Ton Reconditioned Injection Moulder click here
Van Dorn 800 Tons Injection Moulder
Model: 730HP-6800
- Shot size: 139.1 oz
- Platen size: 59.5" x 56.9"
- Daylight open min / max: 17.9"/70.1"
- Clamp stroke: 52.2"
- Hydraulic clamp
- Motor: 100 HP
- Machine dimensions: 40.1' xx 8' x 9.
For more details on Van Dorn 800 Tons Injection Moulder click here
- Shot size: 139.1 oz
- Platen size: 59.5" x 56.9"
- Daylight open min / max: 17.9"/70.1"
- Clamp stroke: 52.2"
- Hydraulic clamp
- Motor: 100 HP
- Machine dimensions: 40.1' xx 8' x 9.
For more details on Van Dorn 800 Tons Injection Moulder click here
Remu 1100 ton Injection Moulding Machines
1) Model: HMSY 1100/5000
Injection unit:
- Screw diameter: 130 mm
- Max. injection pressure: 1565 bar
- Stroke volume: 7300 cm3
- Max. shot weight (PS): 6430 gms.
- Injection rate: 3320 cc/sec.
- Plasticizing rate: 600 kg/hr.
For more details on Remu 1100 ton Injection Moulding Machines click here
Injection unit:
- Screw diameter: 130 mm
- Max. injection pressure: 1565 bar
- Stroke volume: 7300 cm3
- Max. shot weight (PS): 6430 gms.
- Injection rate: 3320 cc/sec.
- Plasticizing rate: 600 kg/hr.
For more details on Remu 1100 ton Injection Moulding Machines click here
Husky 300 ton Injection Moulder
Model: X300
- Extruder diameter: 100 mm
- Shot capacity: 2,700 gram
- Production per hr.: 8,500
- Preforms weight: 52 gram max.
- Product: 1.5 liter
- Dryer: Novatec
- Hopper: 2,700 liter
- Po
For more details on Husky 300 ton Injection Moulder click here
- Extruder diameter: 100 mm
- Shot capacity: 2,700 gram
- Production per hr.: 8,500
- Preforms weight: 52 gram max.
- Product: 1.5 liter
- Dryer: Novatec
- Hopper: 2,700 liter
- Po
For more details on Husky 300 ton Injection Moulder click here
Friday, February 05, 2010
125 to 130 Tons Injection Moulding Machines
We require 125 to 130 tons injection moulding machines as follows:
- Acceptable age: 5 years
- Minimum opening: 15 inch
- Fully micro processor required
- Budget price: INR 7,00,000 or depends on
For more details on 125 to 130 Tons Injection Moulding Machines click here
- Acceptable age: 5 years
- Minimum opening: 15 inch
- Fully micro processor required
- Budget price: INR 7,00,000 or depends on
For more details on 125 to 130 Tons Injection Moulding Machines click here
350 Ton Injection Moulding Machine
We need 350 ton injection moulding machine as follows:
- Preferred brand: Ferromatik Milacron or good brand
- Acceptable age: 2000
For more details on 350 Ton Injection Moulding Machine click here
- Preferred brand: Ferromatik Milacron or good brand
- Acceptable age: 2000
For more details on 350 Ton Injection Moulding Machine click here
Thursday, February 04, 2010
750 to 850 Tons Injection Moulding Machines
We are looking for 750 to 850 tons injection moulding machines for automotive parts as follows:
- Tie bar distance: Min. 1050 x 1050 mm
- Acceptable age: Max 10 years old
- The machine must be in r
For more details on 750 to 850 Tons Injection Moulding Machines click here
- Tie bar distance: Min. 1050 x 1050 mm
- Acceptable age: Max 10 years old
- The machine must be in r
For more details on 750 to 850 Tons Injection Moulding Machines click here
Subscribe to:
Posts (Atom)