Model: 850MG-160
Imported from Japan
Injection unit:
- Screw diameter (mm): 110
- Injection capacity (cm3): 4540
- Injection weight (PS) (g): 4180
- Injection weight (PE) (g): 3360
- Injecction pressure (kgf/cm2): 1645
- Injection rate (cm3/sec): 875 (730)
- Plasticizing capacity (kg/hr): 595 (555)
- Screw speed (rpm): 154 (143)
Clamping unit
- Clamping force (tonf): 850
- Clamping opening force (tonf): 60.
For more details on Mitsubishi 850 ton Injection Molding Machine click here
Tuesday, December 30, 2008
Monday, December 29, 2008
Injection Molding Machines
Model: K-45B
- Make: Kawaguchi
- Tonnage: 45
- Year: 1990
Model: NN50H3000
- Make: Niigata
- Tonnage: 50
- Year: 1989
Model: NN50H4000
- Make: Niigata
- Tonnage: 50
- Year: 1995
Moodel: NS10-1V
- Make: Nissei
- Tonnage: 10
- Year: 1997
Model: NS15-2A
- Make: Nissei
- Tonnage: 15
- Year: 1993
Model: PS20E2ASE
- Make: Nissei
- Tonnage: 20
- Year: 1989
Model: PS20E2ASE
- Make: Nissei
- Tonnage: 20
- Year: 1989
Model: PS40E2ASE
- Make: Nissei
- Tonnage: 40
- Year: 1989
Model: PS40E5ASE
- Make: Nissei
- Tonnage: 40
- Year: 1989
Model: PS40E5ASE
- Make: Nissei
- Tonnage: 40
- Year: 1989
Model: PS40E6ASE
- Make: Nissei
- Tonnage: 40
- Year: 1986
Model: PS60E9ASE
- Make: Nissei
- Tonnage: 60
- Year: 1986
Model: PS60E9ASE
- Make: Nissei
- Tonnage: 60
- Year: 1988
Model: PS60E12ASE
- Make: Nissei
- Tonnage: 60
- Year: 1991
Model: PS60E12ASE
- Make: Nissei
- Tonnage: 60
- Year: 1988
Model: PS80E12ASE
- Make: Nissei
- Tonnage: 80
- Year: 1989
Model: SH50-NIV
- Make: Sumitomo
- Tonnage: 50
- Year: 1992.
For more details on Injection Molding Machines click here
- Make: Kawaguchi
- Tonnage: 45
- Year: 1990
Model: NN50H3000
- Make: Niigata
- Tonnage: 50
- Year: 1989
Model: NN50H4000
- Make: Niigata
- Tonnage: 50
- Year: 1995
Moodel: NS10-1V
- Make: Nissei
- Tonnage: 10
- Year: 1997
Model: NS15-2A
- Make: Nissei
- Tonnage: 15
- Year: 1993
Model: PS20E2ASE
- Make: Nissei
- Tonnage: 20
- Year: 1989
Model: PS20E2ASE
- Make: Nissei
- Tonnage: 20
- Year: 1989
Model: PS40E2ASE
- Make: Nissei
- Tonnage: 40
- Year: 1989
Model: PS40E5ASE
- Make: Nissei
- Tonnage: 40
- Year: 1989
Model: PS40E5ASE
- Make: Nissei
- Tonnage: 40
- Year: 1989
Model: PS40E6ASE
- Make: Nissei
- Tonnage: 40
- Year: 1986
Model: PS60E9ASE
- Make: Nissei
- Tonnage: 60
- Year: 1986
Model: PS60E9ASE
- Make: Nissei
- Tonnage: 60
- Year: 1988
Model: PS60E12ASE
- Make: Nissei
- Tonnage: 60
- Year: 1991
Model: PS60E12ASE
- Make: Nissei
- Tonnage: 60
- Year: 1988
Model: PS80E12ASE
- Make: Nissei
- Tonnage: 80
- Year: 1989
Model: SH50-NIV
- Make: Sumitomo
- Tonnage: 50
- Year: 1992.
For more details on Injection Molding Machines click here
Kawaguchi 360 Tons Injection Molding Machine
Model: KM 360 B
- Tie bar distance: 710 X 710 mm
- Minimum mold height: 350 mm
- Maximum mold height: 650 mm
- Mold opening stroke: 700 mm
- Maximum daylight: 1350 mm
- Screw size: 80 mm
For more details on Kawaguchi 360 Tons Injection Molding Machine click here
- Tie bar distance: 710 X 710 mm
- Minimum mold height: 350 mm
- Maximum mold height: 650 mm
- Mold opening stroke: 700 mm
- Maximum daylight: 1350 mm
- Screw size: 80 mm
For more details on Kawaguchi 360 Tons Injection Molding Machine click here
Injection Molding Machines
Model: Netstal 300
- Year: 1989
- Clamping force: 300 tf
- Injection unit: Dia. 55 mm
- Weight: 20000
Model: Cinncinatti Milakron
- Year: 1989
- Clamping force: 300 tf
- Weight: 9500
Modeel: Demag 350
- Year: 2002
- Clamping force: 350 tf
- Injection unit: Dia.
For more details on Injection Molding Machines click here
- Year: 1989
- Clamping force: 300 tf
- Injection unit: Dia. 55 mm
- Weight: 20000
Model: Cinncinatti Milakron
- Year: 1989
- Clamping force: 300 tf
- Weight: 9500
Modeel: Demag 350
- Year: 2002
- Clamping force: 350 tf
- Injection unit: Dia.
For more details on Injection Molding Machines click here
Injection Molding Machines
Model: Sumitomo SH 160C
- Year: 2000
- Clamping force: 160 tf
- Injection unit: Dia. 45 mm
- Weight: 5400
For more details on Injection Molding Machines click here
- Year: 2000
- Clamping force: 160 tf
- Injection unit: Dia. 45 mm
- Weight: 5400
For more details on Injection Molding Machines click here
Injection Molding Machines
Model: Sumitomo SG 150U
- Year: 1995
- Clamping force: 150 tf
- Injection unit: Dia. 45 mm
- Weight: 8500
Model: Arburg 470C Golden Edition
- Year: 2006
- Clamping force: 150 tf
- Injection unit: Dia.
For more details on Injection Molding Machines click here
- Year: 1995
- Clamping force: 150 tf
- Injection unit: Dia. 45 mm
- Weight: 8500
Model: Arburg 470C Golden Edition
- Year: 2006
- Clamping force: 150 tf
- Injection unit: Dia.
For more details on Injection Molding Machines click here
Injection Molding Machines
Model: Arburg 470C Golden Edition
- Year: 2006
- Clamping force: 150 tf
- Injection unit: Dia. 35 mm
- Weight: 4900
Model: Sumitomo SG 150
- Year: 1993
- Clamping force: 150 tf
- Injection uunit: Dia.
For more details on Injection Molding Machines click here
- Year: 2006
- Clamping force: 150 tf
- Injection unit: Dia. 35 mm
- Weight: 4900
Model: Sumitomo SG 150
- Year: 1993
- Clamping force: 150 tf
- Injection uunit: Dia.
For more details on Injection Molding Machines click here
Monday, December 01, 2008
Injection Moulding Machines - PET Machines
Husky Machines
SIA15021
- Model: Sx500
- Year: 1995
- Tonnage: 500 ton
- Extruder dia.: 120 mm
- Shot capacity: 3,900 gr
- Mould cavities / production per hr.: 72
- Number of moulds: P814
- PPreforms necks: Pco/bpf
- Preforms weights: 45gr, 46gr, 48gr
- Take out robot: 3 pos
- Dryer: Piovan
- Hopper: 2 x 2,200 liter
- Power: 380 volt, 50 hz
- Condition: In production
- Photos: Available
SIA15022
- Model: X1300
- Year: 1994
- Tonnage: 300 ton
- Extruder dia.
For more details on Injection Moulding Machines - PET Machines click here
SIA15021
- Model: Sx500
- Year: 1995
- Tonnage: 500 ton
- Extruder dia.: 120 mm
- Shot capacity: 3,900 gr
- Mould cavities / production per hr.: 72
- Number of moulds: P814
- PPreforms necks: Pco/bpf
- Preforms weights: 45gr, 46gr, 48gr
- Take out robot: 3 pos
- Dryer: Piovan
- Hopper: 2 x 2,200 liter
- Power: 380 volt, 50 hz
- Condition: In production
- Photos: Available
SIA15022
- Model: X1300
- Year: 1994
- Tonnage: 300 ton
- Extruder dia.
For more details on Injection Moulding Machines - PET Machines click here
Husky GL160-HR42/30
Model: GL160-HR42/30
- Year: 2000/1999
- Tonnage: 175
- Clamp type: Hydraulic
- Clamp stroke: 23.6"
- OZ or LD: 5.4
- Control: PLC
- Daylight: 49.2"
- Platen size: 38.85" x 38.85"
- Tie bar spacing: 20.
For more details on Husky GL160-HR42/30 click here
- Year: 2000/1999
- Tonnage: 175
- Clamp type: Hydraulic
- Clamp stroke: 23.6"
- OZ or LD: 5.4
- Control: PLC
- Daylight: 49.2"
- Platen size: 38.85" x 38.85"
- Tie bar spacing: 20.
For more details on Husky GL160-HR42/30 click here
Krauss Maffei KM 250-1900C2
Model: KM 250-1900C2
- Tonnage: 275
- Clamp type: Hydraulic
- Clamp stroke: 27.56
- OZ or LD: 70 mm
- Control: MC4
- Daylight: 41.34
- Options: Anti Screw Rotate, Air Eject, Hydraulic Eje
For more details on Krauss Maffei KM 250-1900C2 click here
- Tonnage: 275
- Clamp type: Hydraulic
- Clamp stroke: 27.56
- OZ or LD: 70 mm
- Control: MC4
- Daylight: 41.34
- Options: Anti Screw Rotate, Air Eject, Hydraulic Eje
For more details on Krauss Maffei KM 250-1900C2 click here
Used Plastic Injection Moulding Machines
- Make: Ferromatic Milacron, L&T Demag, Engel , F.C.S.
- Tonnage: 100 to 200 ton
- Year: 2000, 1998 to 1999
For more details on Used Plastic Injection Moulding Machines click here
- Tonnage: 100 to 200 ton
- Year: 2000, 1998 to 1999
For more details on Used Plastic Injection Moulding Machines click here
Monday, November 24, 2008
Windsor Injection Machine
- Type: 180 Tons
- Diabar distance: 430 x 430
- Shot weight: 600 gms
- Screw dia.: 60
For more details on Windsor Injection Machine click here
- Diabar distance: 430 x 430
- Shot weight: 600 gms
- Screw dia.: 60
For more details on Windsor Injection Machine click here
Windsor Injection Machines
- Type: 50 Tons
- Year: 2000
- Diabar distance: 225 x 300
- Shot weight: 120 gms
- Screw Dia.: 34
- Exp. Price: INR Rs. 4 lacs
- Type: 130 Tons
- Year: 1998
- Diabar distance: 380 x 380
- Shot weight: 310 gms
- Screw dia.
For more details on Windsor Injection Machines click here
- Year: 2000
- Diabar distance: 225 x 300
- Shot weight: 120 gms
- Screw Dia.: 34
- Exp. Price: INR Rs. 4 lacs
- Type: 130 Tons
- Year: 1998
- Diabar distance: 380 x 380
- Shot weight: 310 gms
- Screw dia.
For more details on Windsor Injection Machines click here
Injection Molding Machine
- Distance between tie bar 425 x 425 or 450 x 450
- It should be 3 to 6 years old
- Any standard mech. but micro processor compulsory
- Toggle type
- Delivery at Ahmednagar in Maharashtra
For more details on Injection Molding Machine click here
- It should be 3 to 6 years old
- Any standard mech. but micro processor compulsory
- Toggle type
- Delivery at Ahmednagar in Maharashtra
For more details on Injection Molding Machine click here
Friday, November 07, 2008
Kawaguchi Injection Molding Machine with Two Robot
Specification:
- Tonnage: 650
- Model: KM 650 B
- Tie bar distance: 970 x 970 mm
- Minimum mold height: 500 mm
- Maximum mold height: 1000 mm
- Mold opening stroke: 1000 mm
- Maximum daylight:
For more details on Kawaguchi Injection Molding Machine with Two Robot click here
- Tonnage: 650
- Model: KM 650 B
- Tie bar distance: 970 x 970 mm
- Minimum mold height: 500 mm
- Maximum mold height: 1000 mm
- Mold opening stroke: 1000 mm
- Maximum daylight:
For more details on Kawaguchi Injection Molding Machine with Two Robot click here
Kawaguchi Injection Moulding - Variable Pump
Kawaguchi, 50 tons
Specification:
- Year: 1991
- Tonnage: 50
- Model: B
- Tie bar distance: 310x310 mm
- Minimum mold height: 160 mm
- Maximum mold height: 330 mm
- Mold opening stroke: 250 mm
For more details on Kawaguchi Injection Moulding - Variable Pump click here
Specification:
- Year: 1991
- Tonnage: 50
- Model: B
- Tie bar distance: 310x310 mm
- Minimum mold height: 160 mm
- Maximum mold height: 330 mm
- Mold opening stroke: 250 mm
For more details on Kawaguchi Injection Moulding - Variable Pump click here
Monday, October 13, 2008
220 Ton Injection Moulding Machine
Demag Ergotech Extra 200-840
4,400 Hrs. Like New
20.1 oz 60 mm Nitride Barrel with D2 Screw
22.8" x 22.8" between Tie Bars
Max. Mold Weight 1136 Lbs
Max. Weight on Movable Platen 772 Lbs.
MMax Daylight 49.
For more details on 220 Ton Injection Moulding Machine click here
4,400 Hrs. Like New
20.1 oz 60 mm Nitride Barrel with D2 Screw
22.8" x 22.8" between Tie Bars
Max. Mold Weight 1136 Lbs
Max. Weight on Movable Platen 772 Lbs.
MMax Daylight 49.
For more details on 220 Ton Injection Moulding Machine click here
Wednesday, September 10, 2008
20 Tons Injection Moulding Machine
- Sandreto
- Mega TEWF
- Euro map 820
- Pressure: 20 ton
- Year: 2000
- Condition: In production
- Feeding: Electric motor
For more details on 20 Tons Injection Moulding Machine click here
- Mega TEWF
- Euro map 820
- Pressure: 20 ton
- Year: 2000
- Condition: In production
- Feeding: Electric motor
For more details on 20 Tons Injection Moulding Machine click here
500 Ton Cincinnati Injection Molding Machine
- Model: Hydradamp
- 2 Available
- Platen Size: 48" x 48"
- Distance Between Tie Bars: 32-1/2" x 32-1/2"
- Maximum Daylight: 60"
- Clamp Stroke: 38"
- Dimensions: 375"L x 82"W x 116"H
- Weight: 64,350 Lbs
Equipped With:
- PC-3 Solid State Control Panel
- Hydraulic Knockouts
- 111 Oz.
For more details on 500 Ton Cincinnati Injection Molding Machine click here
- 2 Available
- Platen Size: 48" x 48"
- Distance Between Tie Bars: 32-1/2" x 32-1/2"
- Maximum Daylight: 60"
- Clamp Stroke: 38"
- Dimensions: 375"L x 82"W x 116"H
- Weight: 64,350 Lbs
Equipped With:
- PC-3 Solid State Control Panel
- Hydraulic Knockouts
- 111 Oz.
For more details on 500 Ton Cincinnati Injection Molding Machine click here
Husky PET 600 Ton Injection Molding Machine
1992 Husky PET 600 Ton Injection Molding Machine with 96 Cavity Mold
- Clamp force: 600 metric tons
- Clamp mechanism: hydraulic
- Distance between tie bars: 40.2" x 40.2" (1020 mm x 1020 mm)
- Pllaten size: 56.
For more details on Husky PET 600 Ton Injection Molding Machine click here
- Clamp force: 600 metric tons
- Clamp mechanism: hydraulic
- Distance between tie bars: 40.2" x 40.2" (1020 mm x 1020 mm)
- Pllaten size: 56.
For more details on Husky PET 600 Ton Injection Molding Machine click here
Husky 600 Ton PET Preform Injection Moulding Machi
PET Preform Injection Moulding Machine
Equipped with:
- Siemens PLC
- 3-Stage Robot
1 Novatec Gas Dryer System
1 Husky PET Preform Injection Mould 96-cavity 24 gram 28 mm PCO
For more details on Husky 600 Ton PET Preform Injection Moulding Machi click here
Equipped with:
- Siemens PLC
- 3-Stage Robot
1 Novatec Gas Dryer System
1 Husky PET Preform Injection Mould 96-cavity 24 gram 28 mm PCO
For more details on Husky 600 Ton PET Preform Injection Moulding Machi click here
Monday, September 01, 2008
Used Injection Moulding Machine above 200 Tons
We are looking for injection moulding machine to manufacture containers from 250 ml to 2000 ml take away food containers
For more details on Used Injection Moulding Machine above 200 Tons click here
For more details on Used Injection Moulding Machine above 200 Tons click here
Thursday, August 07, 2008
Ekou PET Injection Moulding Machine
Injection Molding Machine, Ekou HS-330 K3: INR 930,000
Resin Dehumidifier, Bryair BPD 300: INR 460,000
Chilling Plant, Coolcraft 15TR: INR 200,000
Sub Total - INR 1,590,000
Machine Specificationns
Screw Diameter: 70 mm
Screw L/D Ratio: 17.
For more details on Ekou PET Injection Moulding Machine click here
Resin Dehumidifier, Bryair BPD 300: INR 460,000
Chilling Plant, Coolcraft 15TR: INR 200,000
Sub Total - INR 1,590,000
Machine Specificationns
Screw Diameter: 70 mm
Screw L/D Ratio: 17.
For more details on Ekou PET Injection Moulding Machine click here
Ekou Injection Moulding Machine for PET
Equipment Set 1 to sell-
Injection Molding Machine, Ekou HS-330 K3: INR 837,000
Resin Dehumidifier, Bryair BPD300: INR 414,000
Chilling Plant, Armech 15TR: INR 180,000
Sub Total - INR 1,431,000
Machine Specifications
Screw Diameter: 70 mm
Screw L/D Ratio: 17.
For more details on Ekou Injection Moulding Machine for PET click here
Injection Molding Machine, Ekou HS-330 K3: INR 837,000
Resin Dehumidifier, Bryair BPD300: INR 414,000
Chilling Plant, Armech 15TR: INR 180,000
Sub Total - INR 1,431,000
Machine Specifications
Screw Diameter: 70 mm
Screw L/D Ratio: 17.
For more details on Ekou Injection Moulding Machine for PET click here
1100 Tons Van Dorn Injection Moulding Machine
Van Dorn Injection Molding Machine
Wide Platen Design
Platen Size - 73.25" X 65.38"
Distance between Tie Bars - 52" x 44"
Clamp Stroke - 50"
Maximum Daylight - 92"
Min Daylight - 12"
Injjection Stroke - 17.
For more details on 1100 Tons Van Dorn Injection Moulding Machine click here
Wide Platen Design
Platen Size - 73.25" X 65.38"
Distance between Tie Bars - 52" x 44"
Clamp Stroke - 50"
Maximum Daylight - 92"
Min Daylight - 12"
Injjection Stroke - 17.
For more details on 1100 Tons Van Dorn Injection Moulding Machine click here
Friday, July 25, 2008
946 Tons Nissei Injection Molding Machine
Nissei Injection Molding Machine with Star Robot
Platen Size - 70.90" x 70.90"
Distance Between Tie Bars - 52.40" x 52.40"
Clamp Stroke - 38.39"
Maximum Daylight - 88.98"
Minimum Die Thickneess - 27.
For more details on 946 Tons Nissei Injection Molding Machine click here
Platen Size - 70.90" x 70.90"
Distance Between Tie Bars - 52.40" x 52.40"
Clamp Stroke - 38.39"
Maximum Daylight - 88.98"
Minimum Die Thickneess - 27.
For more details on 946 Tons Nissei Injection Molding Machine click here
Thursday, July 24, 2008
Injection Moulding Machine for PC
We have one used Injection Moulding Machine, PLC controlled, for sale.
Tie bar distance: 500 mm
Mould Thickness: 500 mm
Daylight: 1000 mm
Shot weight (presently running): 800 gms
Material in
For more details on Injection Moulding Machine for PC click here
Tie bar distance: 500 mm
Mould Thickness: 500 mm
Daylight: 1000 mm
Shot weight (presently running): 800 gms
Material in
For more details on Injection Moulding Machine for PC click here
Gold Coin Injection Moulding Machines
Following machines are available for sale:-
Make: Polyplast 100 ton
(Semi Micro)
Year of Manufacturing: 2003
Mumbai
Price: INR 5,25,000
Make: Polyplast 100 ton
(full micro)
Year of Manuf
For more details on Gold Coin Injection Moulding Machines click here
Make: Polyplast 100 ton
(Semi Micro)
Year of Manufacturing: 2003
Mumbai
Price: INR 5,25,000
Make: Polyplast 100 ton
(full micro)
Year of Manuf
For more details on Gold Coin Injection Moulding Machines click here
185 Ton Injection Moulding Machine
Make: Akar 185 ton
Mumbai
Year of Manufacturing: 2001
Price: INR 7,50,000
For more details on 185 Ton Injection Moulding Machine click here
Mumbai
Year of Manufacturing: 2001
Price: INR 7,50,000
For more details on 185 Ton Injection Moulding Machine click here
Injection Moulding Machines at Attractive Prices
Injection moulding machines for sale. All the machines are in running condition and are presently in use for our regular production. Person interested should come and see the running machines at our pplant at Medak Dist.
For more details on Injection Moulding Machines at Attractive Prices click here
For more details on Injection Moulding Machines at Attractive Prices click here
Ergotech 150 Injection moulding machine
All the machines are in running condition and are presently in use for our regular production. Person interested should come and see the running machines at our plant at Medak Dist.- AP.
VSX - 85
Year of manufacturing - 1995
Tie bar Distance - 405 x 360
Screw Diameter - 28 dia
Minimum Mould Height - 150 mm
Maximum Mould Height - 400 mm
Total Daylight Opening - 710 mm
Platen Size - 610 x 565
Electrical Motor - 20 hp
Heater Connecting Load - 5.
For more details on Ergotech 150 Injection moulding machine click here
VSX - 85
Year of manufacturing - 1995
Tie bar Distance - 405 x 360
Screw Diameter - 28 dia
Minimum Mould Height - 150 mm
Maximum Mould Height - 400 mm
Total Daylight Opening - 710 mm
Platen Size - 610 x 565
Electrical Motor - 20 hp
Heater Connecting Load - 5.
For more details on Ergotech 150 Injection moulding machine click here
550 Tons Injection Moulding Machine
Make: Cincinnati Magna
Tonnage of the machine: 550 ton
Year of Manufacturing: 2001
For more details on 550 Tons Injection Moulding Machine click here
Tonnage of the machine: 550 ton
Year of Manufacturing: 2001
For more details on 550 Tons Injection Moulding Machine click here
220 Tons Injection Moulding Machine
Make: Battenfeld
Tonnage of the machine: 220 ton
Year of Manufacturing: 1998
Make: Sumitomo
Tonnage of the machine: 220 ton
Year of Manufacturing: 1998
For more details on 220 Tons Injection Moulding Machine click here
Tonnage of the machine: 220 ton
Year of Manufacturing: 1998
Make: Sumitomo
Tonnage of the machine: 220 ton
Year of Manufacturing: 1998
For more details on 220 Tons Injection Moulding Machine click here
Injection Moulding Machine
Make: Cincinnati Omega
Tonnage of the machine: 150 ton
Year of Manufacturing: 2001
Make: L & T Demag
Tonnage of the machine: 150 ton
Year of Manufacturing: 1996
Make: Arburg
To
For more details on Injection Moulding Machine click here
Tonnage of the machine: 150 ton
Year of Manufacturing: 2001
Make: L & T Demag
Tonnage of the machine: 150 ton
Year of Manufacturing: 1996
Make: Arburg
To
For more details on Injection Moulding Machine click here
315 Tons Injection Moulding Machine
We have following old machines in good running condition.
315 Ton M/c (Godrej Make) -
Year - 1998-99
Tie bar Distance - 610 mm X 610 mm
Screw Diameter - 57.5
Minimum Mould Opening - 152 mm
M
For more details on 315 Tons Injection Moulding Machine click here
315 Ton M/c (Godrej Make) -
Year - 1998-99
Tie bar Distance - 610 mm X 610 mm
Screw Diameter - 57.5
Minimum Mould Opening - 152 mm
M
For more details on 315 Tons Injection Moulding Machine click here
130 to 140 Tons Injection Moulding Machines
We have following machines in good running condition.
130 Ton M/c (Windsor Make)
Year - 1989-90
Tie bar Distance - 380 mm x 380 mm
Screw Diameter - 42
Minimum Mould Opening - 20
For more details on 130 to 140 Tons Injection Moulding Machines click here
130 Ton M/c (Windsor Make)
Year - 1989-90
Tie bar Distance - 380 mm x 380 mm
Screw Diameter - 42
Minimum Mould Opening - 20
For more details on 130 to 140 Tons Injection Moulding Machines click here
Thursday, July 17, 2008
400 Ton Injection Moulding Machine
Tonnage of the machine: 400 t
Age of the machine: below 10 years
Preferred Brands: Cincinnati, Demag, JSW & any Taiwan make
City of delivery: Coimbatore
Platen size: 700 x 700 (tie bar distance)
Locking Type: Toggle
PLC 1.
For more details on 400 Ton Injection Moulding Machine click here
Age of the machine: below 10 years
Preferred Brands: Cincinnati, Demag, JSW & any Taiwan make
City of delivery: Coimbatore
Platen size: 700 x 700 (tie bar distance)
Locking Type: Toggle
PLC 1.
For more details on 400 Ton Injection Moulding Machine click here
1000 Injection Moulding Machine
Manufacturer: Krauss Maffei
Storage location: Hannover
Type: KM 1000-10900 A
Technical data
Injection Unit:
Clamping force: 10,000 kN
Screw diameter: 155 mm
Size of mould platens hxv: 15000 x 1500 mm
Stroke volume: 10000 ccm
Tie bars HXV: 1000 x 1000 mm
Injection pressure: 1087 bar
Mould height min.
For more details on 1000 Injection Moulding Machine click here
Storage location: Hannover
Type: KM 1000-10900 A
Technical data
Injection Unit:
Clamping force: 10,000 kN
Screw diameter: 155 mm
Size of mould platens hxv: 15000 x 1500 mm
Stroke volume: 10000 ccm
Tie bars HXV: 1000 x 1000 mm
Injection pressure: 1087 bar
Mould height min.
For more details on 1000 Injection Moulding Machine click here
Tuesday, July 08, 2008
Injection Moulding Machine 1200 Ton
Machine year of construction 1996
Screw Diameter: 115 mm
Max. shot volume: 5346 ccm
Max. injection pressure: 1680 bar
Clamping force max.: 12000 kn
Distance between tie bars: 1200 x 1200 mm
Sizee of mould platens: 2000 x 2000 mm
Min.
For more details on Injection Moulding Machine 1200 Ton click here
Screw Diameter: 115 mm
Max. shot volume: 5346 ccm
Max. injection pressure: 1680 bar
Clamping force max.: 12000 kn
Distance between tie bars: 1200 x 1200 mm
Sizee of mould platens: 2000 x 2000 mm
Min.
For more details on Injection Moulding Machine 1200 Ton click here
180 Ton Injection Moudling Machine
We have a Windsor - 180 machines for immediate sale.
With Double Colour Attachment.
The machine is in perfect working condition and is used for manufacturing of Housewares.
For more details on 180 Ton Injection Moudling Machine click here
With Double Colour Attachment.
The machine is in perfect working condition and is used for manufacturing of Housewares.
For more details on 180 Ton Injection Moudling Machine click here
350 Ton Injection Moulding Machines
We have following used machine for sale
Make: Toshiba
PLC (Control): Devanshi (Retrofitted)
Ton: 350
Platen size: 1000*1000 mm
T. B. Distance: 700*700 mm
Shot Wt.: 1100 gms
Qty.: 1
Machinne is in good running condition and can be seen in production at our works in Noida, U.
For more details on 350 Ton Injection Moulding Machines click here
Make: Toshiba
PLC (Control): Devanshi (Retrofitted)
Ton: 350
Platen size: 1000*1000 mm
T. B. Distance: 700*700 mm
Shot Wt.: 1100 gms
Qty.: 1
Machinne is in good running condition and can be seen in production at our works in Noida, U.
For more details on 350 Ton Injection Moulding Machines click here
190 Ton Injection Moulding Machine
We have following used injection molding machine for sale
Make: Metal Mechanica
PLC (Control): Devanshi (Retrofitted)
Ton: 190
Platen size: 700*700 mm
T. B. Distance: 465*465 mm
Shot Wt.: 400 gms
Qty.
For more details on 190 Ton Injection Moulding Machine click here
Make: Metal Mechanica
PLC (Control): Devanshi (Retrofitted)
Ton: 190
Platen size: 700*700 mm
T. B. Distance: 465*465 mm
Shot Wt.: 400 gms
Qty.
For more details on 190 Ton Injection Moulding Machine click here
50 Ton Injection Moulding Machine
We have following used machines for sale -
Make: Plastar
PLC (Control): Devanshi (Retrofitted)
Ton: 50
Platen size: 480*480 mm
T. B. Distance: 305*305 mm
Shot Wt.: 70 gms
Qty.: 1
Make: Arbuurg
PLC (Control): Devanshi (Retrofitted)
Ton: 50
Platen size: 490*490 mm
T.
For more details on 50 Ton Injection Moulding Machine click here
Make: Plastar
PLC (Control): Devanshi (Retrofitted)
Ton: 50
Platen size: 480*480 mm
T. B. Distance: 305*305 mm
Shot Wt.: 70 gms
Qty.: 1
Make: Arbuurg
PLC (Control): Devanshi (Retrofitted)
Ton: 50
Platen size: 490*490 mm
T.
For more details on 50 Ton Injection Moulding Machine click here
SPD 130 Ton Injection Moulding Machine
Make: Windsor
Mf Date: 1998
Model: SPD 130 Ton
Fully Automatic
DBTB: 380mmx380mm
Condition: Excellent in working condition
Features: New PLC Controller installed last year
PLC Make: Devanshi - Latest Model PLC control with full service back up available in all India
Remarks of Machines: Very well maintained machinery with latest features on PLC i.
For more details on SPD 130 Ton Injection Moulding Machine click here
Mf Date: 1998
Model: SPD 130 Ton
Fully Automatic
DBTB: 380mmx380mm
Condition: Excellent in working condition
Features: New PLC Controller installed last year
PLC Make: Devanshi - Latest Model PLC control with full service back up available in all India
Remarks of Machines: Very well maintained machinery with latest features on PLC i.
For more details on SPD 130 Ton Injection Moulding Machine click here
Electronica M80 Molding Machine
Screw Dia: 35 mm
Injection Pressure: 1550 Kg/Sq.cm
Shoe weight: 124 gms
Screw Stroke: 135 mm
Screw Speed: 0-175 rpm
Injection rate: 95 cc/sec
Plasticizing capacity: 11.5 g/sec
Clamping Force: 880 tons
Mold Clamping Stroke: 300 mm
Max Day Light Opening: 610 mm
Mold Thickness: 125-310 mm
Space between Tie bars: 350 x 310 mm
Hyd.
For more details on Electronica M80 Molding Machine click here
Injection Pressure: 1550 Kg/Sq.cm
Shoe weight: 124 gms
Screw Stroke: 135 mm
Screw Speed: 0-175 rpm
Injection rate: 95 cc/sec
Plasticizing capacity: 11.5 g/sec
Clamping Force: 880 tons
Mold Clamping Stroke: 300 mm
Max Day Light Opening: 610 mm
Mold Thickness: 125-310 mm
Space between Tie bars: 350 x 310 mm
Hyd.
For more details on Electronica M80 Molding Machine click here
Retrofitting Injection Moulding Machine
We offer retrofitting injection moulding machine which is in good working condition and totally new ready condition is as follow,
Make: Windsor
SP-300 GB
Price: INR 12,50,000
Quantity
For more details on Retrofitting Injection Moulding Machine click here
Make: Windsor
SP-300 GB
Price: INR 12,50,000
Quantity
For more details on Retrofitting Injection Moulding Machine click here
Windsor Injection Moulding Machines
We offer retrofitting injection moulding machine which is in good working condition and totally new ready condition is as follow,
We have a Windsor series of injection moulding machine like as:
For more details on Windsor Injection Moulding Machines click here
We have a Windsor series of injection moulding machine like as:
For more details on Windsor Injection Moulding Machines click here
300 Ton Injection Moulding Machine
Windsor SP 300 DD
Year: 1992
Running condition
Price: INR 11,30,000
For more details on 300 Ton Injection Moulding Machine click here
Year: 1992
Running condition
Price: INR 11,30,000
For more details on 300 Ton Injection Moulding Machine click here
Tuesday, June 24, 2008
Windsor 400 ton Injection Moulding Machine
Tonnage of the machine - 400 T
Age of the machine - 18 years
Make - Windsor
Platen size - 1045 MM
Locking Type - RAM
Special Controls and Features
- Single Core Pulling, Hydraulic Ejector
- AAllen Bradley micro processor controller
- Tie bar distance -680 x 680
- Minimum Mould Height - 500 MM
- Maximum Daylight - 1400 MM
- Shot Capacity - 1200 grams in PS
For More Details Contact:
Mr.
For more details on Windsor 400 ton Injection Moulding Machine click here
Age of the machine - 18 years
Make - Windsor
Platen size - 1045 MM
Locking Type - RAM
Special Controls and Features
- Single Core Pulling, Hydraulic Ejector
- AAllen Bradley micro processor controller
- Tie bar distance -680 x 680
- Minimum Mould Height - 500 MM
- Maximum Daylight - 1400 MM
- Shot Capacity - 1200 grams in PS
For More Details Contact:
Mr.
For more details on Windsor 400 ton Injection Moulding Machine click here
Tuesday, June 10, 2008
315 Ton Injection Moulding Machine
We have a 1998 Gold Coin PEL 315 Injection moulding machine
Injection Unit
- Screw Diameter -- 70mm
- Injection Pressure - 2240 kg/sq.cm & 1725 kg/sq.cm
- Injection Stroke - 305mm
- Maximum SShot Weight (PS) - 1047Gms & 1368Gms
- Injection Rate - 1398 CC / SEC & 1825 CC / SEC
- Plasticizing Capacity - 192 Kg/Hr
- Screw L/D Ratio -- 22:1
- Screw Revolution - 0-210 RPM
- Locating Ring Diameter Nozzle Contact Force -- 175MM, 7.
For more details on 315 Ton Injection Moulding Machine click here
Injection Unit
- Screw Diameter -- 70mm
- Injection Pressure - 2240 kg/sq.cm & 1725 kg/sq.cm
- Injection Stroke - 305mm
- Maximum SShot Weight (PS) - 1047Gms & 1368Gms
- Injection Rate - 1398 CC / SEC & 1825 CC / SEC
- Plasticizing Capacity - 192 Kg/Hr
- Screw L/D Ratio -- 22:1
- Screw Revolution - 0-210 RPM
- Locating Ring Diameter Nozzle Contact Force -- 175MM, 7.
For more details on 315 Ton Injection Moulding Machine click here
Monday, May 26, 2008
120 Ton Injection Moulding Machine
We are looking for used plastic injection moulding machine
120 ton injection moulding machine
Fully Automatic
Price: upto INR 3,00,000
For more details on 120 Ton Injection Moulding Machine click here
120 ton injection moulding machine
Fully Automatic
Price: upto INR 3,00,000
For more details on 120 Ton Injection Moulding Machine click here
Win Micro 200 Injection Moulding Machine
Machine: Win Micro 200
Function: Fully Automatic
Technical Details: Microprocessor Controlled Machine
Machine Specialty: Double Core pull, Double Air Blast. Opening Closing & Refilling by Linear CControls from Zefron Italy.
For more details on Win Micro 200 Injection Moulding Machine click here
Function: Fully Automatic
Technical Details: Microprocessor Controlled Machine
Machine Specialty: Double Core pull, Double Air Blast. Opening Closing & Refilling by Linear CControls from Zefron Italy.
For more details on Win Micro 200 Injection Moulding Machine click here
Friday, May 23, 2008
Range of Branded Injection Machines
We are offer following injection moulding machines.
LTM Demag - 100 ton - 1998 - INR 9,50,000
LTM Demag - 150 ton - 1996 - INR 12,00,000
Battenfeld - 220 ton - 1998 - INR 10,50,000
Windsor
For more details on Range of Branded Injection Machines click here
LTM Demag - 100 ton - 1998 - INR 9,50,000
LTM Demag - 150 ton - 1996 - INR 12,00,000
Battenfeld - 220 ton - 1998 - INR 10,50,000
Windsor
For more details on Range of Branded Injection Machines click here
Saturday, May 10, 2008
Nissei Injection Moulding Machine
W/8000F
Screw Dia: 45 MM
Had been making sundry goods.
Material: PP, PS
For more details on Nissei Injection Moulding Machine click here
Screw Dia: 45 MM
Had been making sundry goods.
Material: PP, PS
For more details on Nissei Injection Moulding Machine click here
Tuesday, April 22, 2008
Range of Jon Wai Injection Molding Machines
We want to sell following Jonwai, Taiwan make injection moulding machines 125T- 6 nos, 165T-15 nos, 20T-6 nos, 275T-3 nos and also one bakelite injection moulding of 180T. Our machines are very well maintained and excellent working condition.
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1908&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1908&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Sumitomo 150 Ton Used Injection Molding Machine
We have 1 unit of high-speed Sumitomo 150 Ton used injection molding machine because of high speed injection machine with accumulator, this machine is suitable for molding thin-wall products.
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1907&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1907&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Used Injection Machine Dealer upto 300 Tons
We are a professional injection moulding refurbishing and retrofitting company. We carry stock of refurbished injection machines upto 300 Tons and can to refurbish upto 850 ton machines at client end.
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1909&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1909&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Tuesday, April 08, 2008
SP-3 Windsor Moulding Machine
- Model: SP - 3
- Make: R. H. Windsor
- Capacity: 110 gms
- Hydraulically operated, water cooled, plastic injection moulding machines each complete with hydraulic power pack
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1734&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
- Make: R. H. Windsor
- Capacity: 110 gms
- Hydraulically operated, water cooled, plastic injection moulding machines each complete with hydraulic power pack
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1734&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Monday, March 24, 2008
Injection Machines for Furniture and Crates
Supreme Industries is India's leading manufacturer of plastic furniture and range of other products.
Our company is modifying its product mix and upgrading its manufacturing infrastructure. We have put for sale a range of quality injection moulding machines under our restructuring plan.
For more details please click on the following link
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1359&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Our company is modifying its product mix and upgrading its manufacturing infrastructure. We have put for sale a range of quality injection moulding machines under our restructuring plan.
For more details please click on the following link
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1359&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Thursday, February 28, 2008
Complete Operational Wood Timber and Construction
Consisting of 3 complete installed profile lines with 6 sets of tooling making various boarding and construction type profiles for the building trades and DIY markets. Lines include 2 single screw extruders and one twin screw, use of materials includes various scrap materials and additives. High quality product produced and can be seen operational. Complete factory for sale with all necessary auxiliaries. Factory sold with existing customers and orders. Condition of machinery excellent, Sale price of machinery and customer list £ 525,000
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1848&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1848&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
EPM 140 Ton Injection Moulding Machine
Used Electronica Injection Moulding Machine 260 gms Barrel reworked and screw changed Price INR 4,50, 000
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1883&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1883&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Cincinnati Sigma 150 ton Injection Moulding Machin
Make: Cincinnati Sigma 150 ton Single core pull 360 gm New flow valve changed in 2007 Sep. Price: INR 12,50,000
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1882&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
For more details please click on the following link
http://plastemart.com/usedMachinery_popup.asp?ref_no=1882&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Thursday, February 21, 2008
SP-12 Windsor Moulding Machine
- Model: SP - 12
- Make: R. H. Windsor
- Capacity: 350 gms
- Hydraulically operated, water cooled, plastic injection moulding machines each complete with hydraulic power pack
- Quantity: 2 nos.
- Six heaters of about 3.5 kw load
- 25 hp motor
- Control panel for heaters and motor starter
- Limit switches
- Tonnage: 180
- Shot (Gms): 338
- Motor: 30
- Tie bar Distance in mm: 430 x 430
- Daylight: 900
- Locking Type: Ram
- Type: Gear
For more details please click on the following link
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1732&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
- Make: R. H. Windsor
- Capacity: 350 gms
- Hydraulically operated, water cooled, plastic injection moulding machines each complete with hydraulic power pack
- Quantity: 2 nos.
- Six heaters of about 3.5 kw load
- 25 hp motor
- Control panel for heaters and motor starter
- Limit switches
- Tonnage: 180
- Shot (Gms): 338
- Motor: 30
- Tie bar Distance in mm: 430 x 430
- Daylight: 900
- Locking Type: Ram
- Type: Gear
For more details please click on the following link
http://www.plastemart.com/usedMachinery_popup.asp?ref_no=1732&prefix=UM&bs_status=S&prodarrstr=Search Used Machinery
Subscribe to:
Posts (Atom)